475319
92
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
92 Chapter 7. Troubleshooting
General TV Operation
Symptom Suggested Solution
1. The TV remote control does not work.
• Checkthatthebatteriesareinstalledcorrectly.
• Checkthattheselectedswitchissetto“TV.
• Benomorethan20feetfromtheTVwhenusingtheremotecontrol.
• ProgramtheremotecontroltooperatetheTV(AppendixD).
2. The TV takes several seconds to respond.
• Itisnormalfordigitalchannelstotakelongertotunein.
• PressENTERafterachannelnumbertoavoiddelays.
• Usea4-digitnumberforanover-the-airdigitalchannel.
• Usea6-digitnumberfordigitalcablechannels(yourcableservicemustbeable
to recognize 6-digit channel numbers).
3. Cable provider needs information to start
CableCARD™ service.
On the remote control, press TV MENU and then enter the numbers 999
to display the Host ID and CableCARD™ ID information.
4. You cannot access a channel.
• UsenumberkeysinsteadofCHANNELup/down.
• Besurethechannelyouwanttoviewisinmemory.Seepage67.
• CheckthattheTVisturnedtothecorrectdeviceorantennaforthatchannelby
pressing the DEVICE button.
• MakesuretheV-Chiplockisoff.
• IfyoucannottunetoavirtualdigitalchanneleventhoughtheTVhasalready
memorized digital channels, tune to the channel number actually being used by
the broadcaster. The virtual channel will then be automatically added to memory.
5. On-screen displays appear each time you change
a function.
This is part of normal TV operation.
6. You cannot program the TV to turn on
automatically (timer function)
• TheTVmaybelocked.
• Theclockmaynotbeset.
• Atime-delayedrecordingmayhavestarted.
7. You have forgotten your V-Chip pass code. See Appendix C, Bypassing the V-Chip Lock.
8. V-Chip is not working.
• MakesurethatV-ChipisOn.
• IfV-ChipHoursarecurrentlysettodisabletheV-Chiplock,theV-Chipwillnot
block programming.
9. The TV will not turn on after being plugged in. If green light on front panel is blinking, wait for at least one minute for
the light to turn off, then press Power again.
10. TV functions do not respond to the remote control
or to front panel control and TV will not power off.
Use the System Reset button .
11. TV turned itself off and the light on the front panel
started to blink.
• MomentarypowerfluctuationcausedtheTVtoturnofftopreventdamage.Wait
for the green light to stop flashing and turn On again.
• IftheTVdoesnotstayturnedOn,usetheSystemResetbutton.Ifthishappens
frequently, obtain an AC line power conditioner/surge protector.
• Anunusualdigitalsignalmayhavebeenreceived,triggeringaprotection
circuit. Wait for the light to stop flashing and turn TV on.
12. Name options not available for some channels. Only memorized analog channels can be named.
13. When a device is selected from the Device
Selection menu, the screen is blue (no signal
source).
• Makesuretheselecteddeviceisturnedon.
• FromtheEditNetCommand®menuselectReviewsetting.Verifythatthedevices
are physically connected to the TV inputs as listed. If they are not, either change
the physical connections on the back panel, or select the Change setting on
the Edit NetCommand menu to change the TV NetCommand’s settings for the
connection.
• BeginplayoftheVCR.
92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi WD-62628 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info