Bedienungsanleitung Mitsubishi WD390U-EST (Seite 15 von 69) (Englisch)

549869

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

EN-15

Important:

• Theautomatickeystoneadjustmentmaynot

be carried out correctly because of the ambient

temperature and the installation conditions of the

projector and the screen. In such cases, correct the

keystone manually.

• Whentheprojectorisprojectingimageswhere

acceleration is present, such as in a vehicle and

aircraft, the automatic keystone adjustment may

not function correctly. In such a case, set Auto

Keystone in the Installation menu to Off and correct

the keystone manually.

• Youcancorrecttheverticalkeystones.However,

their adjustment ranges are limited in such

correction.

• Whenthekeystoneadjustmentiscarriedout,the

adjustment value is indicated. Note that this value

doesn’t mean a projection angle.

• Theallowablerangeoftheadjustmentvaluein

the keystone adjustment varies depending on

the installation condition, input signal and aspect

settings in MENU.

• Whenthekeystoneadjustmenttakeseffect,the

MAGNIFY mode and the Overscan function cannot

be used.

• Whenthekeystoneadjustmenttakeseffect,the

resolution decreases. In addition, stripes may

appear or straight lines may bend in images with

complicated patterns. They are not due to product

malfunctions.

• Noisemayappearonthescreenduringthe

keystone adjustment because of the type of the

video signal being projected and the setting values

of the keystone adjustment. In such cases, set the

keystone adjustment values in the range where the

image is displayed without noise.

• Whenthekeystoneadjustmentiscarriedout,the

image may not be displayed correctly because of

the type of input signal.

When entire projected image

isn’t displayed within the screen

(E-Zoom/Shift)

To adjust the projected image size and position, use

E-Zoom/Shift in the Installation menu.

(See page 21 for menu setting.)

1. Display the Installation menu.

2. Press the  or  button to select E-Zoom/Shift.

E-Zoom/Shift

3. Press the ENTER button.

• TheE-ZOOM/SHIFTmenuappearsatthecenter

of the screen.

E-ZOOM

SHIFT

VOL

4. Press the VOLUME  or  button to adjust the

projected image size.

• EverytimetheVOLUME button is pressed,

the projected image becomes larger.

• EverytimetheVOLUME button is pressed,

the projected image becomes smaller.

• Projectedimageisamaximumasfactory

default.

E-ZOOM

SHIFT

VOL

Original image size

(= maximum image size)

Reduced image

5. Press the , ,  or  button to move the

projected image position.

• Everytimethe button is pressed, the

projected image moves up.

• Everytimethe button is pressed, the

projected image moves down.

• Everytimethe button is pressed, the

projected image moves to the left.

• Everytimethe button is pressed, the

projected image moves to the right.

Adjustable in any of

four directions

E-ZOOM

SHIFT

VOL

Important:

• Whenyoureducetheprojectedimageusingthe

E-Zoom/Shift function, the resolution decreases. In

addition, stripes may appear or straight lines may

bend in images with complicated patterns.

Preparation (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD390U-EST Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD390U-EST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info