Bedienungsanleitung Mitsubishi WS48515 (Seite 93 von 100) (Englisch)

32985

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

43. An IEEE 1394 device has been plugged in but

does not appear in the Device Selection menu

(not discovered).

• The IEEE 1394 connection to the TV or another device is not secure

or is loose.

• The IEEE 1394 device is not powered on.

• A device in the IEEE 1394 chain is not powered on - turn on all the

devices.

• The device discovery can take as long as a minute to initiate.

• IEEE 1394 cable is too long (maximum of 15 feet between devices).

• The IEEE 1394 device uses an incompatible protocol and will not be

discovered

44. Cannot record to or from the IEEE 1394 device,

including Dub recordings.

• To initiate a recording to IEEE 1394 device press the REC key.

The Record menu displays allowing setup of the recording.

• The source device for the recording is not powered on.

• When dubbing, the destination device for the recording

is not powered on.

• The wrong media, (analog tape for digital recording, or

digital tape for the analog recording) is in the device.

• Either the program is copy protected, or if there are multiple

subchannels and one of the programs (not necessarily the

program requested) is copy protected.

• The program has already been recorded once and the copy

protection only allows one recording.

• Unapproved source device for copy protected material.

• The recording device can not decode the copyright signal

included in the signal source (try another device if available).

• The playing device (for dubbing) does not support

copyrighted material.

• Source for recording is copyrighted.

• Too many IEEE 1394 devices in network. Insufficient

bandwith available. Disconnect unused devices.

• Source Device has higher speed (S 400) than record device. If

possible, reverse devices, play in the slower device and record

in the faster device.

45. Cannot control the IEEE 1394 device from the

Transport Menu.

• Device may not support the command.

• Selected function is gray (such as Record for a DVD, which does not

support the Record function).

46. When ChannelView™ list is displayed,

information appears incomplete

• Available information is sent from the broadcaster or cable provider.

No other data is available.

47. Program to be recorded was correctly selected

from ChannelView, however, incorrect program

was recorded.

• The broadcaster supplied program information that was incorrect

and/or was changed after a recording was added to the Record List.

48. Incomplete ChannelView program recorded. • Recording device may have lack of space availability and there is not

enough blank space to make a full recording.

49 ChannelView program recording failed. • Connection and compatibility issues with IEEE 1394 (FireWire®)

digital devices. This may include too many Firewire devices in use at

one time, or the recording device not understanding the record

command.

• Television lost power long enough to lose current clock time.

• Analog VCR power was left Off.

Using The System Reset Button

If the TV doesn’t respond to either the remote control or the front panel controls or will not power off, press the

SYSTEM RESET button on the front panel with a pointed item such as the point of a ball point pen or end tip of a

paperclip.

The TV will turn off and the green LED will flash quickly for about one minute. When the green LED stops flashing,

you may turn on the TV again. The changes you made while the TV was most recently on, before you used the

SYSTEM RESET button may be lost, however, the changes you made previously are not lost. Only those changes

since the last power On may be lost when the system reset button is pressed. All other settings are retained.

Problem Possible Solution

Troubleshooting, continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WS48515 Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info