215902
26
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
EN-26
Advanced features (continued)
Supervising and controlling by computer
You can supervise and control the projector's operation using a personal computer via a LAN network.
To supervise and control the projector, install the software "Projector-Control Device Installer*" contained in the attached CD-ROM. For the
installation procedure and usage of the software, see "User Manual for LAN Control Utility" contained in the attached CD-ROM.
*) Functions
Setting of the projector's IP address
Setting of password, display language, and LAN control
PJLink
TM
certification setting (telnet function)
Startup of the controlling / supervising tool (ProjectorView) using the Web browser
Major functions
ProjectorView
The controlling / supervising tool using the Web browser
PJLink
TM
This projector supports standard protocol PJLink
TM
for projector control and you can control and monitor projector's operations using the same
application among projectors of different models and different manufacturers.
Connection
Use a straight-through category-5 cable for LAN connection.
Don't touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage
to the projector.
Using the User Manual
The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM.
Opening the User Manual:
1. Load the CD-ROM into the CD-ROM drive.
2. Open CD-ROM "XD221U".
3. Double-click on "MANUAL_LAN.HTML" within the CD-ROM. A language selection list for the User Manual will be displayed.
4. Move the mouse pointer to the desired language and click.
About PJLink
TM
To use PJLink
TM
function, the PJLink
TM
application software is required.
For the specifications of PJLink
TM
, access to the Web site of Japan Business Machine and Information System Industries Association
(JBMIA). (http://pjlink.jbmia.or.jp/english
)
This projector is fully compliant to the specifications of JBMIA PJLink
TM
Class 1. It supports all the commands defined by PJLink
TM
Class 1,
and the compliance has been verified with the PJLink
TM
standard specifications Version 1.0.
To LAN terminal
LAN cable (option)
(100BASE-TX or 10BASE-T
should be supported.)
Computer
External HUB
LAN cable (option)
(100BASE-TX or 10BASE-T should be supported.)
STANDBY MODE (See page 20.) in INSTALLATION MENU is set to LOW as a factory default. When STANDBY MODE is set to LOW, LAN
connection is not available. To enable the LAN connection, set the STANDBY MODE to STANDARD.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi xd221u xga wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info