Bedienungsanleitung Mitsubishi xd221u xga (Seite 27 von 36) (Englisch)

215902

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

EN-27

ENGLISH

Lamp replacement

This projector is equipped with a lamp to project images. This lamp is

a consumable. It may burn out or its brightness may decrease during

use. In such cases, replace the lamp with a new one as soon as possi-

ble. Be sure to replace the lamp with a new lamp separately sold that

is exclusive to this projector. Contact your dealer for purchase of the

lamp.

Replace the spare lamp using the lamp attachment unit that is

equipped with the spare lamp (separately sold) designed specifically

for this projector.

Caution:

• Do not remove the lamp immediately after using the projector. You

may get burned because the lamp is very hot after use.

• Before replacing the lamp, press the POWER button to turn off the

lamp and wait for two minutes for lamp to cool down. Unplug the

power cord from wall outlet and wait one hour for the lamp to cool

down completely.

• Do not remove the lamp except for replacement. Careless han-

dling can cause injury or fire.

• Do not touch the lamp directly. It may break and cause injury or

burn.

• Be sure not to drop the lamp lid screw into the projector. Also be

sure not to put metal or any flammable objects inside because it

may cause fire or electric shock. If any objects should fall inside,

unplug and contact your dealer.

• Install the lamp securely to prevent failure and fire.

• If the lamp should break, small glass fragments may fall out

through the grilles and some may remain inside of the projector or

the lamp box. When taking the lamp box out, be sure to turn over

the projector and hold the handle of the lamp box to avoid injury

due to the glass fragments.

• If the lamp should break, never shake the lamp box or hold it in

front of your face after removing it. The lass fragments may fall out

and cause injury to your eyes.

• Be sure to use the lamp dedicated to this projector, VLT-XD221LP

for XD221U. Use of other lamps may cause a failure of the projec-

tor.

• Do not use any other tools for replacing the spare lamp, and be

sure to use the lamp attachment unit that is equipped with the

spare lamp (separately sold) designed specifically for this projec-

tor. Use of other tools may cause a failure of the projector.

Make sure that the projector is securely held in place.

1. Remove the cover (a) of the screw fixing the lamp cover with a fin-

gernail. If it is difficult to remove it with a fingernail, use a fine-

tipped tool such as flathead screwdriver.

2. Remove the screw (b) and slide the lamp cover (c) for removal.

The lamp unit is fixed in position with two retaining claws (d) inside

so the lamp attachment unit (e) designed specifically for this pro-

jector is required to replace the lamp.

Do not pull out the lamp forcibly. The lamp unit may be irretrievably

damaged.

A new lamp unit can be installed without the lamp attachment unit.

3. Loosen the two screws (g) indicated as arrows (

) in figure, and

mount the lamp attachment unit (e).

Slide the lamp attachment unit in the direction indicated by a white

arrow after the installation of it, and hook the claw (f) into the hole

of the device to fix the lamp attachment unit.

If not hooking the claw, the lamp attachment unit will be lifted with-

out being fixed in the precise position.

(Caution)

When replacing the lamp, do not remove the screws other than

those in the above picture. If do, it might cause the failure of prod-

uct.

When the projector is mounted to the ceiling:

Secure the lamp attachment unit and the projector with the screw

(h) that come with the lamp attachment unit. Otherwise, the lamp

unit may fall from the inside and cause injuries.

• Contact your dealer when replacing the lamp unit with the pro-

jector mounted to the ceiling.

4. Pull up the handle (i), and then pull out the lamp unit (j) by the han-

dle.

Spare lamp for XD221U: VLT-XD221LP

(a)

(c)

(b)

(d)

(f)

(g)

(e)

(h)

(j)

(i)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi xd221u xga Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info