Bedienungsanleitung Mitsubishi XD8500U (Seite 12 von 79) (Englisch)

549867

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

EN-12

Setting up your projector (continued)

Setup adjustment

How to turn on the projector

When you have to turn on the projector for setup

adjustment, see the following pages:

• Pluggingthepowercord(page19)

• Turningonthepower(page21)

• Turningoffthepower(page22)

Adjusting the position of the

projected image

Adjust the focus.

If the projected image is out of the screen after the

adjustment, adjust the projector position or the lens

position using the lens shift function.

1. Press the ZOOM/FOCUS button to display the

ZOOM/FOCUS menu.

ZOOM

FOCUS

FAST

SELECT:ENTER

2. Adjust with the  or  button to get a ﬁne picture.

• WhentheENTERbuttonispressedwhile

the ZOOM/FOCUS menu is displayed, the

adjustment mode is switched between FAST

and STEP. When FAST is selected, the speed of

focus controlled by the  or  button becomes

fast, and it becomes slow when STEP is

selected.

3. Press the LENS SHIFT button.

• TheLENSSHIFTmenuappearsatthecenterof

the screen.

LENS

SHIFT

FAST

SELECT:ENTER

4. Press the , ,  or  button to move the image

position.

• Whenthe button is pressed, the image

moves down.

• Whenthe button is pressed, the image

moves up.

• Whenthe button is pressed, the image moves

to the right.

• Whenthe button is pressed, the image moves

to the left.

• WhentheENTERbuttonispressedwhiletheLENS

SHIFT menu is displayed, the shift mode can be

switched between FAST and STEP. When FAST

is selected, the lens shifts in a large amount with

the , ,  or  button, and it shifts in a small

amount when STEP is selected.

• WhentheZOOM/FOCUSmenuortheLENSSHIFT

menu is displayed while no video signal is input to

the projector, a crosshatch appears on the entire

screen.

• Becarefulnottobecaughtintheopeninginthe

lens while the lens is moving.

• Whilethelensshiftisworking,thescreenmay

ﬂicker.

• WhentheTESTPATTERNbuttonontheremote

control is pressed, the test pattern is displayed.

Each time you press the TEST PATTERN button,

the display switches in the order of “cross hatch

(red)”

→

“cross hatch (green)”

→

“cross hatch

(blue)”

→

“100%white”

→

“100%black”

→

“horizontal color bars”

→

“vertical color bars”

→

“normal screen”

→

… When you press the ZOOM/

FOCUS button or LENS SHIFT button at this time,

you can adjust the zoom, focus, or lens shift with

the test pattern displayed.

Changing the AUTO POWER OFF setting

The AUTO POWER OFF function of this projector is

enabled by default.

Change the AUTO POWER OFF setting as necessary.

(See page 35.)

To change the AUTO POWER OFF setting:

(See page 31 for menu setting.)

1. Display the INSTALLATION 2 menu.

2. Select AUTO POWER OFF by pressing the  or 

button.

AUTO POWER OFF 5min

3. Select your desired item by pressing the  or 

button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD8500U Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi XD8500U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info