Bedienungsanleitung Mitsubishi XD8500U (Seite 14 von 79) (Englisch)

549867

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

EN-14

Setting up your projector (continued)

• WhentheKEYSTONE-modeadjustmentis

performed, the displayed image may be distorted.

• Dependingontheinstallationconditionsofthe

projector and the screen, a perfect rectangular

image and the proper aspect ratio may not be

obtained. Slight distortion can be corrected by the

CORNERSTONE-mode adjustment.

• Noisemayappearonthescreenduringthe

KEYSTONE-mode adjustment because of the type

of the video signal being projected and the setting

values of the KEYSTONE-mode adjustment. In

such cases, set the KEYSTONE-mode adjustment

values in the range where the image is displayed

without noise.

• WhenyoucarryouttheKEYSTONE-mode

adjustment and the CURVED-mode adjustment

in combination, the adjustment range becomes

narrower than that in the case where you carry out

these adjustments individually. When setting the

KEYSTONE-mode adjustment value to 11 or larger,

you cannot use the CURVED-mode adjustment.

• WhencarryingouttheKEYSTONE-mode

adjustment while the option lens is in use, you

may not be able to obtain a perfectly rectangular

image or the correct aspect ratio. Slight distortion

can be corrected by the CORNERSTONE-mode

adjustment.

Adjustment using the CORNERSTONE mode:

Use this adjustment for ﬁne adjustment of the image

shape. You can use this adjustment for adjusting

the image displayed in the edge blending mode

(see page 36), too. For adjustment, press the

ENTER/GEOMETRY button on the projector or the

GEOMETRY button on the remote control to display

the CORNERSTONE mode and then press the , ,

 or  button.

CORNERSTONE

LOWER RIGHT

SELECT : BLANK

: 0

Every time you press the BLANK button, the

adjustment menu changes as follows:

LOWER RIGHT → LOWER LEFT → UPPER RIGHT →

UPPER LEFT → RESET → LOWER RIGHT ...

Adjustment using the KEYSTONE mode:

When the screen and the projector are not placed

perpendicularly to each other, projected images

become trapezoidal. If you cannot place them

perpendicularly to each other, press the ENTER/

GEOMETRY button on the projector or the

GEOMETRY button on the remote control to display

the KEYSTONE mode and then press the , ,  or

 button to correct the distortion.

KEYSTONE

SELECT : BLANK

: 0

Every time you press the BLANK button, the

adjustment menu changes as follows:

KEYSTONE → RESET → KEYSTONE ...

KEYSTONE menu

You can correct the distortion vertically or horizontally

focusing on the screen center.

In the following cases (for front projection):

Press the



button.

Press the



button.

Press the



button.

Press the



button.

When you press the  or  button in the RESET

mode, the distortion correction is reset.

Important:

• ForproperKEYSTONE-modeadjustmentresults,

reset the lens to the factory-adjusted position using

LENS SHIFT RESET in the INSTALLATION 1 menu

before carrying out KEYSTONE-mode adjustment.

(See page 34.)

• WhentheKEYSTONE-modeadjustmentiscarried

out, the adjustment value is indicated. Note that

this value doesn’t mean a projection angle.

• WhentheKEYSTONE-modeadjustmenttakes

effect, the resolution decreases. In addition, stripes

may appear or straight lines may bend in images

with complicated patterns. They are not due to

product malfunctions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD8500U Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi XD8500U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info