Bedienungsanleitung Montiss CSC5623M (Seite 23 von 51) (Deutsch, Englisch, Holländisch, Französisch)

481109

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

English

Floor Head

The floor head is supplied with a separate connection fitting. To use the floor head, push the

connection fitting onto the rear side of the floor head and turn it 180 degrees upwards. This has to

be done only once. The floor head is now fully assembled. (Illustration 7)

The floor head is used for the cleaning of large washable wall and floor areas. The floor head can

be used either with or without a floor cloth.

Sensitive surfaces (wood, linoleum etc.) should always be cleaned using the cloth supplied. Place

the floor head on the cleaning cloth and pull the cloth under the clips at both sides. The cleaning

effect of a floor cloth can be improved by turning and changing the cloth regularly. To clean very

dirty areas, move the floor head over the surface more slowly in order to increase the cleaning

action of the steam.

Attention: the device is not suitable for cleaning unsealed wooden floors, soft plastics or wooden

furniture.

Integrated storage compartment (Illustration 8)

All the accessories are conveniently stored in the housing of the unit. To reach the accessories,

you must place the unit on a flat surface. Lift the upper part of the unit, using the carrying handle,

while you press the storage button with your other hand. To replace the upper part on to the

device, place it straight on the bottom part and you press until it locks audibly. (Illustration 9)

Attachment adapter (Illustration 10)

Push the attachment adapter as far as it will go onto the connection nozzle of the steam gun until

you hear it click. The attachment adapter remains locked in position. The attachment adapter can

be removed again by pressing the release button and pulling the adapter off.

Concentration nozzle

The concentration nozzle is pushed directly onto the attachment adapter until it clicks into place.

It can be used with various fittings (jet nozzle attachment, brush attachments, 2-in-1 combination

attachment), depending on the task in hand The concentration nozzle can be used with various

fittings for cleaning: inaccessible areas such as corners, joints, blinds, radiators, toilet bowls, taps,

stainless steel, windows, mirrors, enameled surfaces, stain removal.

Jet nozzle attachment

The jet nozzle attachment can be fitted directly to the concentration nozzle. The jet nozzle

attachment is fitted by pushing and twisting, and removed by pulling and twisting.

Brush attachment

The brush attachment can be fitted directly to the concentration nozzle. Choose the right brush

attachment (plastic or metal bristles) for the task at hand. The brush attachment is fitted by

pushing and twisting, and removed by pulling and twisting.

2-in-1 combination attachment

The rectangular shaped steam head can be fitted directly onto the concentration nozzle. The head

is fitted by pushing and twisting and removed by pulling and twisting. It can be used either with or

without the cotton cover, depending on cleaning requirements. It is perfect for the care and

cleaning of cushions, carpets, car seats, bathrooms and kitchens.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Montiss CSC5623M Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info