the Filter Holder clean we recommend you
periodically run the machine with the Espresso
Filter Holder in place, without coffee, using water
only.
Rinse the Filter Water Tank occasionally with cold
water. Do not use a cloth as any residue or lint
may be left behind to clog the coffee maker.
Should the holes in the Espresso Filter become
blocked with coffee grinds, use a fine bristled
brush to help clean.
When your coffee maker is not being used, we
recommend that you do not leave the Espresso
Filter Holder attached to the machine as this will
reduce the life of the gasket.
5
Wash the Filter Coffee Jug (23), Jug Lid (22), Filter
Holder (19) Removable Permanent Mesh Filter
(21) in warm soapy water. Rinse and dry all parts
thoroughly. Refit the Filter Holder.
Care must be taken to ensure that the non-drip
valve situated on the bottom of the filter holder is
not damaged during cleaning.
6
Remove the Drip Tray (11) from the appliance and
remove any spilt coffee and water then clean
them with a damp cloth or a damp sponge.
7
You must clean the Steam Wand and cover
immediately after each use, after it has cooled
down. Briefly use the steam setting to clear any
remaining milk out of the Wand and Cover.
Remove the Steam Wand Cover, place under
warm running water to remove excess milk. If the
Steam Wand becomes blocked, use a small pin to
clean more thoroughly.
• WARNING: Steam from the Steam Wand is
extremely hot and can scald.
• IMPORTANT: Never wash your coffee machine
accessories in a dishwasher.
• Never use harsh or abrasive cleaners.
• NO parts are suitable for cleaning in a
dishwasher.
1
Disconnect the appliance from the mains supply.
2
Make sure the appliance has cooled down
completely.
3
Remove the Water Tank (13) and Drip Tray (11)
from the machine.
4
Fill the Water Tank with dissolved citric acid
solution, up to the max level marked on the side
of the tank.
5
Re-fit the Water Tank and Drip Tray to the
machine.
6
Place an empty container under the Brewing
Head (3) to gather the descaled hot boiled water.
7
Connect the appliance to the mains supply.
8
Slide the On/Off button (10) and wait for the
Indicator Light (9) to stop flashing.
9
Slide the Large Cup Switch (7), water will flow
through the unit.
10
Slide the switch again, dispensing until the water
tank is empty.
11
Repeat the process with cold water only to flush
the system.
• If you live in a hard water area, we recommend
that your coffee maker is descaled at regular
intervals, e.g. every 2-3 months. In areas of
moderately hard water, you should descale every
6 months.
• If the water filters through more slowly than usual,
it is a sign that descaling is necessary.
• We recommend you use a proprietary liquid
descaler which is especially made for coffee
makers and plastic kettles. Follow the instructions
on the bottle or sachet, and then operate the
coffee maker with just water 3 times before
making filter coffee.
• Do not use a kettle descaler unless the packet
specifically states it is suitable for coffee makers.
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from.
Please have the product name, model number
and serial number to hand when you call to help
us deal with your enquiry quicker.
UK Helpline: 0844 871 0960
IRE Helpline: 1800 409 119
Spares: 0844 873 0726
Talk To Us
If you have any questions or comments, or want
some great tips or recipe ideas to help you get
the most out of your products, join us online:
Blog: www.homeofthehouseproud.com
Facebook: www.facebook.com/morphyrichardsuk
Twitter: www.twitter.com/loveyourmorphy
Website: www.morphyrichards.com
8
Descaling - filter coffee
Contact us
Descaling - espresso
