Bedienungsanleitung Morphy Richards Redefine (Seite 8 von 84) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Spanisch, Türkisch)

588260

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

BRITA ﬁltration

Filtering your water improves the taste and

appearance of beverages by reducing limescale, lead,

chlorine and other impurities.

The BRITA MAXTRA Filter Cartridge offers improved ﬁltration

due to MAXTRA Technology. The natural

MicroporeFilter in combination with the powerful Protect

Filter reduces chlorine and limescale for a great natural taste

and further reduces metals such as lead and copper. Unique

ﬂow control ensures the perfect

ﬁltration time for best results.

For maximum ﬁlter performance and for optimum taste, it is

important to change your BRITA MAXTRA Filter Cartridge

regularly. BRITA recommends that you replace the cartridge

every 4 weeks.

Using the BRITA ﬁltration system is optional. If you do not

wish to use the ﬁltration system, simply remove the BRITA

Hopper (21) and MAXTRA Filter Cartridge (19) from the Water

Tank (7).

Filtering water through the BRITA Filtration System takes

roughly 4 minutes to ﬁlter 1.5L of water. You can use the

system while ﬁltering, providing enough water has ﬁltered

into the Water Tank.

Installing a BRITA MAXTRA

Cartrige

1 Unwrap the BRITA MAXTRA Cartridge (19) and immerse

in water, gently shake to loosen any bubbles.

2 Push the BRITA MAXTRA Cartridge into place in the

BRITA Hopper.

3 Place the BRITA Hopper into the Water Tank.

Before returning the Water Tank to the Main Unit, ﬁll the

BRITA Hopper with Cold Water and allow the

water to ﬁlter through the BRITA MAXTRA Cartridge.

Discard the ﬁltered water. Repeat this step twice.

4 Fill the Brita Hopper with fresh water and return the

Water Tank to the main unit. Your BRITA Cartridge is

ready for use with your Hot Water Dispenser.

BRITA Memo 2

The BRITA Memo (20) measures the recommended time of

use of your MAXTRA Filter Cartridge (19). The BRITA Memo

is located in the top of the BRITA Hopper (21).

To reset the BRITA Memo, please press and hold down the

Start Button on the Memo until all four bars appear in the

display and ﬂash twice. The Cartridge Active Indicator Light

in the bottom right corner of the BRITA Memo indicates that

it is working. After four weeks, all four bars will disappear

and a ﬂashing arrow will indicate that the cartridge should

now be changed. After changing the cartridge, reset the

Memo.

Replacing the BRITA Memo

The BRITA Memo (20) has a life of approximately 5 years. To

remove the exhausted BRITA Memo, place a screwdriver in

the notch next to the BRITA Memo and push it out. Please

note that BRITA Memo should not be removed for any other

reason than to dispose of it.

More information on the use of BRITA ﬁlter cartridges and

the BRITA Memo can be found in the BRITA information

guide supplied with your hot water dispenser.

Telephone our replacement parts helpline (0844 873 0726)

for your new BRITA Memo. If you require assistance on using

your BRITA MAXTRA ﬁlter cartridge or BRITA Memo, please

call BRITA Customer Care team on 0844 742 4800.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Morphy Richards Redefine Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info