Bedienungsanleitung Morso 2800 series (Seite 24 von 36) (Englisch, Dänisch)

744380

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

DK ENG

Distance requirements for ue pipe

If using un-insulated ue pipe in a combustible environment then the distance

between combustibles and the ue pipe must be 3 times the diameter of the pipe but never

less than 375 mm.

For other CE approved smoke pipes (insulated) the distance requirement will be indicated

on the pipe.

Distance requirements for the complete installation (stove and ue pipe)

Longest distances, regardless of whether it is from the ue pipe or from the stove must be

observed.

We recommend that the stove be installed at least 10 - 15 cm from masonry, in order to al-

low heat to circulate and to facilitate the cleaning of the inside and outside of the stove. A

layer of wallpaper on a brick wall is normally viewed as non-ammable material.

The oor

If the stove is installed on a ammable oor, national and local regulations must be observed

with regard to the size of the non-ammable underlying surface that must cover the oor be-

neath the stove. The underlying surface must naturally be able to bear the weight of the stove

and, if applicable, the steel chimney.

Distance to furniture

The minimum clearance to combustible materials in front of the stove is 900 mm. for Morsø 2800

(.950 mm with un-insulated ue) The minimum distance to combustible materials must be

observed; furthermore, it should be considered whether furniture and other items will dry out

if placed near the stove.

A wood-burning stove gets hot when it is red. Caution must therefore be observed, par-

ticularly with regard to children touching the stove.

1.5 The chimney

If local regulations permit, the stove may be connected to a chimney already serving anoth-

er replace (such as an oil-burning stove or another wood-burning stove). Attention should

be paid to any requirements concerning the location of ue pipes if two or more replaces

are connected to the same chimney.

The wood-burning stove must never be connected to a chimney to which a gas-burning

stove is already connected.

An ecient, modern stove places great demands on the chimney, so you should get the chim-

ney sweep to evaluate chimney.

The aperture of the chimney must comply with national and local regulations. In general, the

aperture area should measure at least 175 cm2 (150 mm diameter) for wood-burning stoves.

An overly large chimney aperture will mean that too much energy will be required to heat

the chimney suciently to achieve an acceptable draught in the chimney.

Minimum distance to combustible material:

Installation Stove type Distance

Distance

front of

stove

Normal parallel Morsø 2800

uninsulated ue

125 mm 350 mm - 900 mm

Normal parallel Morsø 2800

insulated ue

100 mm 300 mm - 950 mm

Corner Morsø 2800

uninsulated ue

- - 125 mm 900 mm

Corner Morsø 2800

insulated ue

125 mm 950 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Morso 2800 series Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Morso 2800 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info