Bedienungsanleitung Motorola ML25254 (Seite 24 von 36) (Englisch)

779576

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

4. Press

SELECT

softkey to save your selection.

NOTE

If you set the ring volume to O, the screen will display

L1/L2 RINGER OFF

8.16 Speakerphone, Handset and Corded Headset Volume

During a call, press VOL + and VOL - of the navigation button to adjust the call volume until you

reach a comfortable listening level. The phone stores the setting after the last button pressed.

8.17 Hold

1. During a call, press HOLD to put the line on hold. The screen will display

LINE 1/LINE 2 ON HOLD

and the line icon will ﬂash. The line button indicator will ﬂash also.

2. When the line is on hold, the hold alert tone will be emitted to both the person on hold and to

the user that initiated the hold.

Press the corresponding LINE button to release the hold and return to the call again.

8.18 Conference Calls

This system can support 3-way and 4-way conference calls.

8.18.1 Joining a call in progress

While a call is in progress, another user can join that call by pressing the corresponding LINE

button on the base. Both parties on the original call will hear a tone to alert them someone else

has joined the call.

NOTE

If the Line Privacy feature is On for the original call, the call cannot be joined by another user.

8.18.2 3-way conference call by an intercom call

1. While on a call, press INTERCOM.

2. Using VOL + and VOL - of the navigation button to scroll to the desired handset and press

SELECT

softkey.

3. The selected handset will emit a page tone. The user on the selected handset can press t or s

to answer the intercom / paging call.

4. The originating caller can then press

CONF

softkey to establish a 3-way conference between

the external caller and the intercom call.

8.18.3 3-way conference call with two lines

1. While on a call on Line 1, press HOLD to put the call on hold.

2. Press LINE 2 to get a dial tone. Dial the phone number, and then talk to the other person.

3. The originating caller can then press

CONF

softkey to establish a 3-way conference between

the two lines.

8.18.4 4-way conference call (Line 1 + Line 2 + 2 extensions)

1. While on a call with both Line 1 and 2 on hold, press INTERCOM and select the desired handset

to intercom.

2. The selected handset will emit a page tone. The user on the selected handset can press t or s

to answer the intercom / paging call.

3. The originating caller can then press

CONF

softkey to establish a conference.

4. Since Line 1 and 2 are both on hold, the user will be prompted to select Line 1, Line 2 or Both

to conference with. If

BOTH

softkey is selected a 4-way conference is established between the

originating caller, both lines and the intercom call.

9 Intercom Calls

9.1 Making an Intercom Call

1. In idle mode, press any One-Touch Memory (1 -10) button for the extension you want to

intercom. One-Touch Memory (1) button represents handset 01, (2) represents handset 02, etc.

The intercom / page tone will be emitted.

Or, press INTERCOM to bring up the list of all registered handsets and base (except itself).

Then using VOL+ and VOL- of the navigation button to scroll to the desired handset and press

SELECT

softkey.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Motorola ML25254 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info