Bedienungsanleitung Movado Watches (Seite 36 von 72) (Englisch)

757301

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

NOTES: You can use only one of the two Chronograph

functions – ADD or SPLIT – at a time; they cannot be

used simultaneously. To switch to the other mode, you

must ﬁrst stop the chronograph and reset the counter

display to zero. However you can select and use the

other timepiece functions while the chronograph

is running.

Choosing a mode:

In ADD Mode, you can start and stop the counter

to measure the combined time of a series of shorter

events, for example the actual playing time of a

football game, where play is repeatedly interrupted.

Each time you stop the counter, the timing is halted: it

does not continue to track elapsed time.

In SPLIT Mode, you can take intermediate time

readings as a continuing event, a race for example,

progresses. The chronograph will continue to track the

elapsed time in the background while the intermediate

time reading is displayed. When the crown is pushed

again, the counter display will change to reﬂect the

ongoing elapsed time.

Reading the display:

When the chronograph is running in either mode

– ADD or SPLIT– the counter display will show the

following information:

Timed period < 1 minute:

SP or Ad Mode – seconds + hundredths.

(Ex: “Ad 05 58”)

Timed period > 1 minute and < 1 hour:

SP or Ad Mode – Ad and minutes + seconds

+ hundredths appear alternately.

(Ex: “Ad” and “05 50 36” alternate)

Timed period > 1 hour and < 48 hours:

SP or Ad Mode – minutes – seconds –

hundredths appear alternately.

(Ex: “01 35 28” and “Ad 55” alternate)

USING THE ALARM

Setting the alarm:

1. Select the Alarm AL function.

2. Pull crown out to position 2: The numerals indicating

hours and minutes start to ﬂash in lower display.

3. Turn crown in either direction to set the Alarm to the

desired time: A rapid rotation changes the hours; a

slow rotation changes the minutes.

4. Push crown back in to position 1 (neutral position):

The alarm is now set, and AL appears in the l

ower display.

5. Push crown in to position 0 to stop the alarm.

NOTE: The countdown function can be cancelled at

any time by pushing the crown in to position 0 and

holding it down for more than 2 seconds. A running

countdown can be restarted by pushing the crown

in once.

Turning the alarm on or off:

To activate or deactivate the alarm, select the Alarm AL

function, then push on the crown.

The display will indicate whether the alarm is turned on

or off after each push:

AL shows on display – alarm is activated to go off

at set time.

OF shows on display – alarm is turned off.

To silence the alarm when it goes off, push down on

the crown.

NOTE: Please take into account whether the watch is

operating in 12-hour (AM/PM) or 24-hour mode when

setting the alarm and when reading the time it is set to

go off.

Testing the alarm:

Select the Alarm AL function, then push and hold the

crown down for more than 2 seconds: the alarm will

start to sound. Release the crown to stop the alarm test.

15 ANA-DIGI QUARTZ CHRONOGRAPH

1/100 OF A SECOND

Includes the Movado Dura ana-digi quartz chronograph

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Movado Watches Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Movado Watches

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info