Bedienungsanleitung MTD Zero Turn Serie Frontcut (Seite 14 von 18) (Englisch)

495078

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Operating Instructions English

 Start the engine as stated.

 Release the parking brake.

 Slowly engage the drive pedal until

you have reached the speed you

want.

Stopping the appliance

 Release the accelerator.

 Press the brake pedal until

the appliance is stationary.

Mowing

Never change the direction of

motion when the appliance is driving

or coasting (see “Driving the

appliance”)

Information on mowing

– In normal mowing mode

/I/ (see Operation,

ignition lock):

Before reversing the machine,

switch off and raise the cutter

deck.

– In reverse mowing mode

/I/ (see Operation,

ignition lock):

Exercise extreme caution when

reverse mowing and do not

activate unless absolutely

necessary.

 Start the engine as stated.

 Set the throttle lever into position .

 Switch on the cutter deck (PTO).

 Lower the cutters.

 Release the parking brake.

 The required speed is selected

with the forward drive pedal

(by slowly depressing it).

The appliance starts moving.

General information

When adjusting the cutting height

and driving speed, ensure that the

machine is not overloaded.

Depending on the length, type,

and dampness of the grass it may

become necessary to adjust the

cutting height and appliance speed

for the optimum grass catcher

performance.

If blockages occur, reduce the

driving speed and increase the

cutting height.

The best way to mow

Cut the first two rounds so the cut

grass is thrown out sideways into

the middle.

 Never allow the grass to grow

too long

 Never cut the grass too low.

 Drive in a straight line.

 Never mow at high speed,

particularly when a mulching kit

or grass catcher is installed.

Mulching

Various appliances can also mulch

when fitted with the corresponding

accessories. Ask your specialised

dealer for details.

Switching off the machine

 Stopping the appliance:

Release the accelerator press

brake pedal until the appliance

is stationary.

 Switch off the cutter deck.

 Set the throttle lever into the middle

position.

 Raise the cutters to the top.

 Set the ignition key to “ /0”

after twenty seconds.

 Engage the locking brake

before leaving the appliance.

 Remove the ignition key.

Pushing the appliance

Fig. 10

Push the appliance only when

the engine is switched OFF.

The levers for releasing the gears are

situated on the left and right sides of

the frame behind the front wheels.

 Unlocking the gear drive:

To push the unit when the engine

is switched off, pull up both levers,

then pull out and press down.

 Release the parking brake.

Return the gear lock lever before

restarting the engine.

Note

Never tow the unit while the front

wheels are in contact with the

ground. This can cause serious

damage to the gears.

Tips on lawn care

Mowing

Lawns consist of various grass

types. Frequent mowing promotes

the growth of grass, resulting in

strong roots and a firm sward. If you

seldom cut the grass, you will

enhance the development of high-

growing types of grass and other

weeds, such as clover, daisies …).

The normal height of a lawn is

approx. 4–5 cm. Only

of the

overall height of the grass should be

mown; i.e. at 7–8 cm, cut at normal

height.

Try not to cut the grass shorter than

4 cm, otherwise the lawn will suffer

during dry periods. If the grass has

grown particularly high (forexample,

during a holiday period), cut it back

to its normal height in several

stages.

Mulching with accessory

(optional)

Fig. 16

The grass is chopped up fine

(approx. 1 cm) during mowing and is

left on the lawn. The lawn therefore

retains a lot of nutrients. Please note

the following:

 Do not mow wet grass.

 Never mow more than max. 2 cm

of the total grass length.

 Drive slowly.

 Have the engine at max. rpm.

 Clean the mower cover regularly.

Note

Attach mulching accessory

depending on the model.

For installation examples see

Fig. 16a/b.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Zero Turn Serie Frontcut Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Zero Turn Serie Frontcut

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info