Bedienungsanleitung MTD Zero Turn Serie RZT-S (Seite 10 von 18) (Englisch)

629100

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Operating Manual English

Installing the seat

Fig. 2d

Note

When attaching the seat, do not

damage the seat switch cable!

Push excess cable back into the

opening of the seat support.

Mount discharge flap on the

mower deck

Fig. 2e

 Remove nuts (1) from the carrier

pins (2).



Mount discharge flap (3) on the

carrier pins (2) and attach with

the nuts (1).

Controls and indicators

Warning. Damage to the unit.

First of all the functions of the

controls and indicators are

described here. Do not execute

any functions yet!

Fig. 1

1 Forward pedal

2 Reverse pedal

3 Pedal for parking brake/

cruise control

4 Cutting height adjustment lever

5 Throttle/Choke *

6 Combination indicator *

7 Choke *

8 PTO switch

9 Can holder

10 Ignition lock *

11 Storage bin

12 Gear release lever

13 Fuel tank

14 Seat adjustment lever *

15 Steering wheel

16 Brake pedal

(* depending on model)

Forward pedal (1)

Fig. 8

The pedal controls the speed

in a forward direction.

Reverse pedal (2)

Fig. 8

The pedal controls the speed

in a reverse direction.

Information on forward/reverse

pedal

To stop or change direction of

travel, release the appropriate

pedal.

Parking brake/

Speed control (3)

Fig. 8

This pedal has a dual function:

Actuate the parking brake .

Depress brake pedal (16) all the

way and press pedal.

Release the parking brake.

Depress brake pedal (16) all the

way, pedal is released.

Switching on Tempomat :

When driving, press the pedal.

The forward speed selected at this

point (but not top speed) is main-

tained, and the drive pedal can be

released.

When the forwards accelerator

pedal or brake pedal is depressed,

the cruise control is automatically

switched off.

Cutting height adjustment

lever (4)

Fig. 1

Largest cutting height, cutters top =

lever to “H/8”.

Smallest cutting height, cutters

bottom = lever to “L/1”.

Note

Smallest cutting height ~3,8 cm.

Largest cutting height ~10 cm.

Choke (7/5, depending on

model)

Fig. 5

To start a cold engine, pull out the

choke (fig. 5a) or set the throttle to

position (fig. 5b).

Throttle (5)

Fig. 4

Set engine speed steplessly.

Fast engine speed = .

Slow engine speed = .

Combination indicator (6)

(optional)

Fig. 7

According to the model, the

combination indicator can consist

of the following elements.

Oil pressure (1):

The indicator light is lit while the

engine is running, immediately

switch off engine and check oil

level. Where necessary, visit

a garage.

Brake (2):

Indicator lamp lights up if the brake

pedal is not depressed or the

parking brake is not locked when

the engine starts.

Cutter deck (PTO) (3):

The indicator lamp lights up when

the cutters are not switched OFF

at engine start (PTO).

Battery charge indicator (4):

If the indicator light lights up when

the engine is running, this means

that the battery is not sufficiently

charged. Where necessary, visit

a garage.

Operating hour counter (5):

Indicates the operating hours in

hours and

hours on the display.

Ampere meter (6):

This shows the charging current

from the generator to the battery.

Optional functions

(depending on model)

Fig. 7a: Type 1

Fig. 7b: Type 2

Operating hour counter

(type 1, type 2):

When the ignition is switched on,

the battery voltage indicator is

indicated for a short period and

then the operating hours are

indicated. The operating hours are

always counted except for when

the ignition key is in the „Stop“

position or when it is removed.

Oil change display (Type 1):

Each time 50 operating hours have

elapsed (according to the model),

the oil change indicator „CHG/OIL“

appears in the display for five

minutes. This message appears

after the next two hours of

operation. See the engine manual

for oil change intervals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Zero Turn Serie RZT-S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Zero Turn Serie RZT-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info