Bedienungsanleitung MTD Zero Turn Serie RZT-S (Seite 11 von 18) (Englisch)

629100

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

English Operating Manual

Maintenance indicator (Type 2):

The maintenance indicator reminds

the user of the maintenance

intervals for changing the engine

oil and the air filter and outputs

warning signals for oil level and

battery voltage.

Changing the oil:

Every 50 operating hours

(oil change interval) the letters

CHG

– OIL – SOON – TIME appear

in succession on the display for

7 minutes.

Change the engine oil immediately,

see engine operating manual.

Oil level:

If the letters

LO – OIL – TIME appear

in succession on the display, the

engine oil level is too low.

Switch off the engine immediately

and check the engine oil level, see

engine operating manual. Top up

the oil if required.

Battery voltage:

If the key is turned to the

position, the battery voltage is

displayed briefly and then the total

operating hours.

If the letters

LO – BATT – TIME

appear in succession on the

display, the battery voltage is

too low (< 11.5 volts).

Recharge the battery as quickly

as possible as specified in the

"Maintenance" section of this user

handbook. Possibly have the

charging system checked by

a service centre for possible

damage.

Air filter maintenance:

Every 25 operating hours

(air filter maintenance interval) the

letters

CLN – AIR – Filt – TIME

appear in succession on the

display for 7 minutes.

Service the air filter immediately,

see engine operating manual.

Notes:

–

TIME means: The total operating

hours (see above) are displayed.

– If the oil change and air filter

maintenance intervals occur at

the same time, the oil change

display appears first and then

the air filter display.

PTO switch (8)

Fig. 6

The PTO switch actuates an

mechanical clutch to switch ON

and OFF the cutters.

ON = pull the switch.

OFF = press the switch.

Note

When the safety lock system has

automatically switched OFF the

appliance (e.g. when reversing with

activated cutters), first switch ON

and then OFF the PTO switch to

release the lock on the clutch.

Can holder (9)

Fig. 1

Ignition lock (10, depending

on model)

Ignition lock

Fig. 3a

Starting:

Turn key to the right until the

engine is running, then release.

Key is set to .

Stopping:

Turn the key to the left, to .

Ignition lock with OCR function

Fig. 3b

This ignition lock features an OCR

function (= user-controlled mowing

in reverse gear).

Starting:

Turn key to the right until the

engine is running, then release.

The key at (normal)

allows mowing in the drive

direction.

OCR position:

Turn key to left of normal position to

reverse mowing position

and press the switch

(1).

The indicator light (2) comes on

and indicates to the user that the

unit can now mow in reverse and

forward gear.

Stopping:

Turn the key to the left, to .

Note

Do not use the OCR function

unless absolutely necessary,

otherwise work with the key in the

normal position. The OCR function

switches off automatically as soon

as the key is turned to the normal

position or the engine is switched

off (stop position or disconnection

of the engine by the safety interlock

system).

Storage bin (11)

Fig. 1

Gear release lever (12)

Fig. 9

To push the unit when the

engine is switched off.

Pull out both levers (near

each back wheel) and then press

them to the right.

To drive the unit, push the

lever to the left and press in.

Fuel tank (13)

Fig. 1

Adjustable seat

(14, optional)

Fig. 12

Pull the lever, and adjust the seat.

Steering wheel (15)

Fig. 1

Brake pedal (16)

Fig. 8

The brake pedal can be used

to brake quickly, to engage and

disengage the locking brake, and

to switch OFF speed control.

Note

The forwards and reverse

accelerator pedal must not be used

if the brake pedal is depressed.

This may damage the gears.

Operating procedure

Follow the instructions in the

engine handbook!

Danger

Risk of injury

No person, especially children,

and/or animals should be allowed

to stand close to the mower while it

is in use. They could be injured by

stones or similar objects that might

be thrown out. Children must never

be allowed to operate the mower.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Zero Turn Serie RZT-S Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Zero Turn Serie RZT-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info