683938

Muller FU 40.00 knx Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
BA FU40knx Anwendungsprogramm HM; DE,GB - 23005 - ED – V09
INSTRUCTION MANUAL ENGLISH – PAGE 2
/ 3
Parameters
Parameter time settings
Time and date settings
Adjustments / Description
Values
Time offset to UTC [hh:mm]
30 minutes steps
Select DST rule
Without DST, DST at local time, DST at UTC time,
European DST, USA DST, Australian DST
Date/time by receiver or bus value
Receiver (internal), Bus (external)**
Send date and time
never, on query, on query and automatic/cyclic
Cycle interval for date and time
* see note at bottom of this page
Parameters will be available only if one of the parameters shown below has
been selected within parameter time settings:
Parameter DST settings for local rule
Parameter DST settings for UTC rule
Advanced settings for DST
Adjustments / Description
Values
At which time starts DST
Value selection please see ETS
At which time ends DST
Value selection please see ETS
Does DST start on a weekday or on a fixed date
Value selection please see ETS
At which week in month starts DST
Value selection please see ETS
At which weekday starts DST
Value selection please see ETS
At which month starts DST
Value selection please see ETS
Does DST stop on a weekday or an a fixed date
Value selection please see ETS
At which week in month ends DST
Value selection please see ETS
At which weekday ends DST
Value selection please see ETS
At which month ends DST
Value selection please see ETS
Parameter GPS coordinates and sun data
You have the possibility to send the following data to the bus: Geographical
coordinates, azimuth and sun elevation angle as well as sunrise and sunset
times.
Adjustments / Description
Values
Coordinates by receiver or bus value
Receiver (internal), Bus (external)**
Send GPS coordinates
never, on query, on query and automatic/cyclic
Cycle interval for coordinates
every 30 seconds, every minute, every hour, every 6 hours,
every 12 hours, at 00:00 am, at 00:02 am
Send sun azimuth and elevation
never, on query, on query and automatic/cyclic
Cycle interval for sun azimuth and elevation
every 30 seconds, every minute, every hour, every 6 hours,
every 12 hours, at 00:00 am, at 00:02 am
Send sunrise/sunset times
never, on query, on query and automatic/cyclic
Cycle interval for sunrise/sunset times
* see note at bottom of this page
Parameter fault and state interval
Minutes before time receiver changes to "not OK" [minutes]
15 – 255
Send GPS state
never, on query, on query and automatic/cyclic
Cycle interval for GPS state
every 30 seconds, every minute, every hour, every 6 hours,
every 12 hours, at 00:00 am, at 00:02 am
Parameter time switch standard
You have the possibility to activate 2 switching times (functionality like a time
switch with daily program) with a defined switching duration. Depending on the
start time and duration a switch-bit with the value “1” for ON respectively the
value “0” for OFF will be sent to the bus.
Adjustments / Description
Values
Time switch
Inactive/active
2nd switching time
Inactive/active
1
st
switching time : Switch on from [hour], [minute]
00:00 – 23:59
1
st
switching time: Switch on to [hour], [minute]
00:00 – 23:59
2
nd
switching time: Switch on from [hour], [minute]
00:00 – 23:59
2
nd
switching time: Switch on to [hour], [minute]
00:00 – 23:59
Parameter time switch astro
You have the possibility to activate astronomic switching times (functionality
like a time switch with astro program / solar timer). At sunset and sunrise,
depending on your parameter settings, a value (switching bit or scene) will be
sent to the bus. The calculations of the sunset and sunrise times are based on
the GPS data (coordinates / date / time).
Adjustments / Description
Values
Astro time switch function
Inactive/active
Astro time switch application
ON at darkness / OFF at brightness,
OFF at darkness / ON at brightness
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 – 64
Scene number for switching off
1 – 64
Parameter time switch astro plus
You have the possibility
to activate astronomic switching times (functionality like a
time switch with astro program / solar timer). At sunset and sunrise, depending on
your parameter settings, a value (switching bit or scene) will be sent to the bus.
For the sunset and sunrise switching times you can program an offset.
Additionally, you have the option to activate an Extra time switch. With this
function you can program further switching times (OFF / ON) with an adjustable
duration (e.g. for energy saving solutions). The calculations of the sunset and
sunrise times are based on the GPS data (coordinates / date / time).
Adjustments / Description
Values
Astro plus time switch function
Inactive/active
Astro plus time switch application
ON at darkness / OFF at brightness,
OFF at darkness / ON at brightness
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 – 64
Scene number for switching off
1 – 64
Extra time switch
Inactive/active
Astro plus time switch offset morning [minutes]
-128 – 127
Astro plus time switch offset evening [minutes]
-128 – 127
Extra time switch – Switch off
Inactive/active
Switch off from [hour], [minute]
00:00 – 23:59
Switch off to [hour], [minute]
00:00 – 23:59
Extra time switch – Switch on
Inactive/active
Switch on from [hour], [minute]
00:00 – 23:59
Switch on to [hour], [minute]
00:00 – 23:59
* every 30 seconds, every minute, every hour, every 6 hours, every 12 hours, at 00:00 am, at 00:02 am, on change of DST, every hour and change of DST, every 6 hours and change of DST, every 12 hours
and change of DST, at 00:00 am and change of DST, at 00:02 am and change of DST
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Muller FU 40.00 knx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Muller FU 40.00 knx

Muller FU 40.00 knx Bedienungsanleitung - Deutsch, Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info