Bedienungsanleitung Multiplex COCKPIT SX (Seite 77 von 84) (Englisch)

561578

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Operating Instructions

Page 75

ENGLIS

18.2. Setting up a new model

Menu: (

MEMO) NEW

Moving to the NEW menu:

4 to MENU, r (SETUP appears),

3 to MEMO, r (GO TO appears),

3 to NEW, r (model type flashes)

When you set up a new model, the C

OCKPIT SX always

offers the last selected model type as the starting point.

Select the desired model type using the 3-D digi-

adjustor: EASY, GLIDER, ACRO, HELI

A brief press r on the 3-D digi-adjustor takes you into

the IN MEM menu. Here you select the memory in

which the new model is to be stored.

When you have selected a memory for the new model,

press the 3-D digi-adjustor briefly r to move into the

NAME menu. (Î 18.3.)

Notes:

• Only vacant memories are offered

When you leaf through, you will only see the memo-

ries which still contain no data.

• EnterIN MEM = 0 for no new model

If you select 0 using the 3-D digi-adjustor, and con-

firm your choice with a brief press on the 3-D digi-

adjustor r, a new model is not set up, and you are re-

turned to the NAME menu.

• Conclude with a long press ª

This is an alternative method of concluding the pro-

cess without setting up a new model (wait for the

confirmation beep). In this case you are returned to

the INFO 1 display.

The method of setting up the individual model types is

described in the following sections:

13.3.1. for EASY 14.3.1. for GLIDER

15.3.1. for ACRO 16.3.1. for HELI

18.3. Entering / changing the model name

Menu: (

MEMO) NAME

The method of entering the model name is described in

detail in the sections covering each model type.

The procedure for changing the model name:

4 to MENU, r (SETUP appears),

3 to MEMO, r (GO TO appears),

3 to NAME,

r (current name appears, first character flashes)

Enter the desired characters one by one:

3 4 select number, symbol or letter

(0 to 9, :, /, <, -, >, ?, space, A to Z)

r proceed to next character

ª interrupt data entry process, go to INFO 1

After the sixth character a brief press r returns you to

the NAME menu.

18.4. Copying model memories

Menu: (

MEMO) COPY

There are two reasons for copying model memories:

1. You may wish to set up a new model, and already

have a similar model stored in another memory.

2. You may wish to try out different settings on a model

without changing the settings in the existing memory.

When you copy a memory, the current model memory

is always used as the source; it is copied into the se-

lected destination memory.

Moving to the KOPIE menu:

4 to MENU, r (SETUP appears),

3 to MEMO, r (GO TO appears),

3 to COPY, r (0 flashes)

Current memory Destination for copy

Select the destination for the copy using the 3-D digi-

adjustor. A brief press r on the 3-D digi-adjustor carries

out the copy process, then returns you to the KOPIE

menu.

Notes:

• Only vacant memories are offered

When you are selecting a memory, you will only see

the memories which still contain no data.

• If all model memories contain model data, you

will be unable to select a destination memory.

In this case the flashing 0 cannot be changed using

the 3-D digi-adjustor.

• Select COPY = 0 if you do not wish to copy

If you select 0 with the 3-D digi-adjustor and confirm

your choice with a brief press r, a new model will not

be set up, and you will be returned to the COPY

menu.

• Concluding with a long press ª

This is an alternative method of concluding the pro-

cess without setting up a new model (wait for the

confirmation beep). In this case you are returned to

the INFO 1 display.

Important: no automatic switch to the copy

When the copy process is complete, you remain in the

current memory. If you wish to make changes to the

copy, you must select the copy in the GO TO menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex COCKPIT SX Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex COCKPIT SX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info