Bedienungsanleitung Multiplex ROYALevo7 (Seite 47 von 77) (Englisch)

30268

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

ROYAL evo 7

Page 46

16.2. Sub-menu: Assignment

This menu shows you the channel and servo output se-

quence for all channels 1 - 7. The servos must be con-

nected to the receiver in the model in the sequence

shown in this menu. The servo sequence varies accord-

ing to the selected model template and the selected

servo configuration (MULTIPLEX, HiTEC, Futaba, JR)

(Î 18.6.3.). You can assign a different or particular con-

trol function to certain channels (= partially free servo

assignment).

You can also switch each servo from UNI to MPX servo

signal format. At the same time you can select the

number of calibration points for each servo at this point.

Table for

Servo.Assign menu

Col. 1

Channel / servo number

ROYALevo 7  max. 7 channels / servos

The transmission mode (PPM 6 or 7) is set

automatically (Î 16.2.)

Col. 2

Channel / servo name

Here the name of the transmitter or mixer

which is assigned to the channel is displayed.

“- - -“ means that this receiver output is not in

use. In this case a neutral signal is generated

at the output.

Col. 3

Servo signal format

If not all of the servos / speed controllers /

gyro connected to the receiver have the

standard UNI servo signal format (neutral

pulse width = 1.5 ms), you can change the

signal format to MPX (1.6 ms neutral pulse

width) for each receiver output individually.

Col. 4

Servo calibration points

At this point you can define how many cali-

bration points will be available in the Servo

Calibrate menu (Î 16.2.).

2P 2 points (e.g. for throttle, aero-tow)

3P 3 points (e.g. elevator, rudder)

5P 5 points

(if non-linear characteristics are to be

corrected, or deliberately generated)

This is the procedure for:

x carrying out the assignment process

x changing the servo signal format

x selecting the number of calibration points:

1. Select the channel / servo number, then

press the ENTER button or the 3D digi-adjustor

2. Select the function (control or mixer)

(or press REV/CLR to erase the assignment),

then press the 3D digi-adjustor

Note:

If the assignment of the selected channel is fixed,

this field is skipped; continue with 3.

3. Select the signal format (or not, as required),

then press the ENTER button or the 3D digi-

adjustor.

4. Select the number of calibration points,

then press the ENTER button or the 3D digi-

adjustor

The cursor now jumps back to the servo number, to in-

dicate that the settings for the selected channel are

completed.

16.2.1. Free assignment with fixed-wing models

With fixed-wing models based on the model templates

BASIC1, BASIC2, ACRO, DELTA, GLIDER, 4FLAP, various

transmitter controls can be selected for the free / vari-

able channels. You can find out which channels are free

or variable by consulting the descriptions of the fixed-

wing model templates (Î 20. onward):

Available

control

Note

Elevator

Elevator signal only no mixing

Rudder

Rudder signal only no mixing

Throttle

Throttle signal only no mixing

Spoiler

Spoiler signal only no mixing

Flap

Flap signal only no mixing

L. gear

Retract signal only no mixing

Aero-tow

Aero-tow signal only no mixing

Brake

Brake signal only no mixing

Gyro

Gyro signal with all mixed signals from the

Gyro mixer

Mixture

Mixture signal only no mixing

AUX1

AUX2

AUX1/2 signal only no mixing

M.naut1

M.naut2

Control signal for MULTInaut IV receiver

module Î 24.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo7 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info