Bedienungsanleitung Multiplex ROYALevo9 (Seite 47 von 58) (Englisch)

30282

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Instructions

Seite 47

ENGLISH

4. In the mixer „Rotor head“ set geometry to 90°. This

causes the servos „HEAD le“ an „HEAD ri“ to be

controlled by Roll (Aileron) and Pitch (Elevator) on-

ly.

15.6. Sub-menu „Throttle compensation“

I affects the active model memory

Range 0% to 100%

Default OFF

Each value can be assigned to a 3-D digi-adjustor

for in-flight adjustment (Î 10.2.2)

The purpose of the throttle compensation mixer is to

maintain constant system rotational speed in model

helicopters. Collective control movements (collective

pitch), large cyclic control commands (roll and pitch-

axis) and major tail rotor control commands (as are used

especially in aerobatics) all affect system rotational

speed, and these changes are unwanted. This mixer is

used to compensate for each change separately. The

final settings for the mixer values can only be found

during the test-flying programme. In most cases values

in the range 10 - 20% are required.

15.6.1. Parameter „Rudder“ (Yaw)

Range +/-100%,

Default OFF

Yaw control commands which increase the tail rotor

blade pitch angle require a linear throttle increase up to

the maximum set value at full deflection.

Yaw control commands which decrease the tail rotor

blade pitch angle require a linear throttle reduction up

to the maximum set value at full deflection.

Positive and negative values are required for this pa-

rameter because the tail can move with or against the

direction of the main rotor. Throttle must be increased

or decreased accordingly.

15.6.2. Parameter „Aileron“ (Roll)

Range 1% to 100%,

Default OFF

Roll control commands (both directions, right and left)

require a linear throttle increase up to the maximum set

value at full deflection.

15.6.3. Parameter „Elevator“ (Pitch axis)

Range 1% to 100%,

Default OFF

Pitch-axis control commands (both directions, forward /

back) require a linear throttle increase up to the maxi-

mum set value at full deflection.

15.7. Setting up “free mixers”

The term “free mixers” means the mixers which are

defined in the menu Setup/Mixer (Î 13.2). The mixers

defined there (max. 14) can then be adjusted in the

menu * Mixers to meet the requirements of your par-

ticular model.

Note

The mixers defined in the menu L Setup/Mixer def (Î

13.2) are only available for use with fixed-wing models -

not with model helicopters.

In the interests of clarity the G Mixer menu only lists

those mixers which are used in the currently selected

model, i.e. which you have already assigned in the

menu K Servo/Assignment ( Î 16.2):

The Combi-Switch and Aileron differential mixers are

always listed.

The next section explains how to set up a “free mixer”

using the example of the AILERON+ mixer, which is

defined by default and is used in several model tem-

plates.

The example shows how to set up the mixer AILERON+

(-> the various control deflections of the ailerons) as

they may be required on a model glider (4-flap wing).

What does the menu show?

Mixer values

The lower five lines show the mixer inputs and the

transmitter controls (which operate the control sur-

face/s) according to the mixer definition.

Werte

The next two columns display the mixer values (1 or 2)

of the associated mixer input. Only these values can be

changed in this menu.

“Dynamic heading”

Line 3 of the menu displays a “dynamic heading” which

varies according to the input at which the cursor is posi-

tioned. The heading provides additional information

about the current input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo9 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info