- Search by folder:
1. Press AMS button thrice. The display will show “DIR SCH” for a few seconds and
change to total folder number
2. Rotate the SELECT/VOLUME knob to search your desired folder name, press SELECT/
VOLUME knob to enter the selected folder
3. Rotate the SELECT/VOLUME knob to select your desired track, press SELECT/
VOLUME button to start playback.
Note:
* Do not use CDs with irregular shape (for example octagonal or heart-shaped).
*
media, CD-Burner
*
support all different models. Please try another USB device or SD card if your device
is not supported.
*
it includes some special playback procedure which might not be compatible with the
procedure of this unit.
*
*
ESP function
The ESP (Electronic Shock Protection) works for all formats of discs.
Press AMS button twice. The display will show “ FILE SCH” for a few seconds and change
to “ ”. Enter the characters by pressing the corresponding buttons. (Y
also select the characters by rotating the SELECT/VOLUME knob.) Press SELECT/
VOLUME knob to
name when it is found. Press SELECT/VOLUME to start playback.
Note: In case of wrong input, press AMS button to cancel it.
KEY Mode Select
1/P A,B,C,1
2/INT D,E,F
3/RPT G,H,I,3
4/RDM J,K,L,4
5/DIR- M,N,O,5
6/DIR+ P
7/MOD S,T
8/ V
9/ Y
0/DSP _,-,+,0
SELECT/VOLUME (Rotate) All the CHARACTER above
SELECT/VOLUME (Press) Start searching
GB - 1
GB - 16
GB - 10
GB - 15
GB - 12
GB - 17
GB - 13
GB - 18
GB - 14
LIST
BLUE
SP WATROUBLEMAI
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack.
2. Press PWR button to turn the unit on.
3. Press 7/MOD to select
4. Start playback from your auxiliary source.
5.
6. 7/MOD button to select
other source.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by New One S.A.S is under license. Other trademarks
and trade names are those of their respective owners.
P
On the mobile phone, enable Bluetooth and select “M-1230BT” from the Device List.
(Refer to the user manual of the mobile phone to be connected for detailed operations.)
If the mobile phone prompts for a passcode, use “0000”. Some Bluetooth devices will
ask you to accept the connection.
When pairing is successful, “LINKED” will appear on display for a few seconds. The
Bluetooth symbol appears on display
Use your mobile phone to do connection or disconnection.
The Bluetooth symbol will disappear from display when the Bluetooth function on your
mobile phone is turned off.
Hereby
the essential requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at http://www
M-1230BT
• Answering / rejecting an incoming call
Press key to answer the incoming call.
Press key to reject the incoming call.
• Hang up a call
When the conversation is nished, press key to hang up the call.
• Checking phone book / received / dialed / missed call
• 7/MOD button repeatedly until “PHONE” appears on displayT-MENU button
for 2 seconds and “BOOK” appears on displayT-MENU button repeatedly to show
items as below: BOOK---RECEIVED---DIALED---MISSED---PHONE
In each item you can use or button to check corresponding number
For
phone via Bluetooth. Y
Note:
* It is necessary the phone number is in the phone not in the SIM card).
* Some mobile phones may not support this function.
General
Power Requirement
Load Impedance
Dimensions
Weight Approx.
FM T
T
IF Range
Usable Sensitivity (-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
CD player Section
Signal-to-noise Ratio
Separation
Distortion
Frequency Response
Bluetooth:
RF Output Power:
AT
the cover
all servicing to qualied personnel.
The lightening
alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
If at any time in the future you should need to dispose of this product please
note that W
waste. Please recycle where facilities exist. Check with your Local
retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)
CAUTION: Invisible laser radiation when open and interlocks defeated.
exposure to beam.
WT
rain or moisture.
Class 1 laser product.
12V DC (1
4 ohms
Approx. 188x194 x 59 mm (d / w / h)
Approx. 1.2 kg
87.5-108(MHz)
10.7MHz
12dBuV
50dB
30dB (1 kHz)
40-12000Hz
60 dB
50 dB
<0.5%
20 - 20000Hz
2.402-2.48GHz
2dBm
Note: Due to continuous
change without prior notice.
Symptom Cause Solution
No power
The car ignition switch is
not on.
If the power supply is connected
to the car accessory circuits, but
the engine is not moving, switch
the ignition key to “ACC”.
The fuse is blown. Replace the fuse.
Disc cannot be
loaded or ejected.
Presence of CD disc inside
the player
Remove the disc in the player
then put a new one.
Inserting the disc in reverse
direction.
Insert the compact disc with the
label facing upward.
Compact disc is extremely
dirty or detective disc.
Clean the disc or try to play a
new one.
T
is too high.
Cool off or until the ambient
temperature return to normal.
Condensation.
Leave the player off for an hour
or so, then try again.
No sound.
V Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
Sound skips.
The installation angle is
more than 30 degree.
Adjust the installation angle less
than 30 degree.
The disc is extremely dirty
or defective disc.
Clean the compact disc, then try
to play a new one.
The operation keys
do not work.
The built-in microcomputer
is not operating properly
due to noise.
Press the RESET button.
Front panel is not properly
xed in place.
Install the front panel properly
The radio does not
Work. The radio
station automatic
selection does not
work.
The antenna cable is not
connected.
Insert the antenna cable rmly
The signals are too weak. Select a station manually
Precaution
- Clean the front panel with a soft cloth, or damp chamois leather
- Handling the Detachable Front Panel: Do not expose to rain or water;
- Do not drop or apply shock.
- Make sure that you keep your set away from high temperatures.
- The use of apparatus in moderate climates.
-
as vases, shall be placed on the apparatus.
-
Cleaning the Connector
If the connector between the main unit and the front panel is dirty
working condition. T
the connector with an alcohol swab. Gently clean and avoid damaging the connector
Notes:
For the sake of safety
cleaning. Never keep your nger or any metal device on the connector directly
Replacing the Fuse
Make
is blown, check the power connection and replace with a new one. If the same problem
occurs, it would be subjected to the malfunction in-house. In such cases, please consult
the nearest service dealer
• Call out
Making an outgoing call by inputting the phone number manually
Press 7/MOD button repeatedly until “PHONE” appears on display button once.
The display will become blank. Enter phone number with number buttons and press
SELECT/VOLUME knob to conrm the dialing.
(Note: In case you inputted a wrong numberT button to cancel it.)
T
* : press and hold 5/*/DIR- button for 2 seconds.
# : press and hold 6/#/DIR+ button for 2 seconds.
• TRANSFER THE CALL BETWEEN MOBILE PHONE
During the talking mode, press and hold T button to tran
the mobile phone and the unit.
• BLUETOOTH AUDIO
The
phone via the car radio. With the mobile phone paired, press 7/MOD button repeatedly
until “PHONE” appears on display
sound will be heard through the car radio.
Press 1/P button to pause playback. Press again to resume playback.
Press / to select track.
Note: If the car radio is connected to other Bluetooth device instead of mobile phone, the
sound will be cut and P / buttons become no function when AMS button is
pressed twice in the cause of Bluetooth audio streaming. If you encounter this situation,
turn OFF and then ON again the Bluetooth function in your Bluetooth device and reconnect
it to the car radio again.
Notes:
-
phones / audio players.
-
of all mobile phones together with the unit.
- If you found the conversation is not clear
-
T
mobile phone and the unit is within 3 meters.
Searching a track in MP3-CD/USB/SD:
- Search by track number:
Press AMS button once. The display will show “NUM SCH” for a few seconds and change
to “NUM ”. Press the number button 0-9 to select the track number
SELECT/VOLUME knob to conrm and start playback.
- Searching by File Name
The
the corresponding buttons listed on the below
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole V
LISTENING TO DISC
Load/Remove a disc
Press PWR button to turn on the unit.
Insert the disc into the disc slot with the printed side facing up. Playback starts
automatically
T .
T
Connect your USB device to the USB port on front panel. It will switch to USB mode and
start playback automatically
T
Detach the front panel and insert a SD card to the card slot. Install the front panel again. It
will switch to card mode and start playback automatically
Basic player functions
Play/pause: press 1/P to suspend momentarily the playing track. Press again to
resume playback.
Skip/fast search: press to skip forward to next track or press to skip backward to
previous track. Press and hold or to search quickly within a track.
Intro playback:
Press 2/INT button. “INT ON” appears on display for a few seconds. It will start to play
rst 2/INT button again to cancel intro playback. “INT
OFF” appears on display for a few seconds.
Repeat:
Press 3/RPT button once to repeat your desired track, and “RPT ONE” appears on display
for a few seconds. Press 3/RPT again to repeat all tracks, and “RPT
display for a few seconds.
Random playback:
Press 4/RDM
for a few seconds. Press 4/RDM again to cancel this function, and “RDM OFF” appears
on display for a few seconds.
Directory selection:
Press DIR- button or DIR + button to select directory downward or upward.
(Note: If it does not contain any directory in the MP3 disc/ USB/ SD, there is no function
when pressing DIR- button or DIR + button.)
AR-3768 IB MUSE 001 REV0 GB.indd 2 2016/4/26 10:33:25
