NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole V alentin, France
SETUP MENU
Navigating the setup menu
1. Press SETUP to display the setup main menu.
2. Press ◄,► to select a menu icon.
3. Press ▲,▼ to select one of the available options under a menu icon.
4. Press ► to access the submenu and ▲,▼ to select an option.
5. Press ENTER to conrm your selection.
6. Press◄ to return to a previous menu.
7. Press SETUP to exit from the setup menu.
AUTO STA NDBY 3 H
General Setup Page
* TV DISPLA Y : selects the aspect ratio of the playback picture.
4:3 P ANSCAN:
● When wide-screen video is played, this mode clips the right and left sides of the image so
that it can be viewed on a conventional screen.
● Some wide-screen DVDs that do not permit Pan Scan mode playback are automatically played
in letterbox mode (black bands top and bottom).
4:3 LETTERBOX:
● When wide-screen video is played in this mode on a conventional screen, black bands appear
at the top and bottom of the screen.
16:9: wide screen display .
● This is the correct mode for playing wide-screen videos on a wide-screen TV .
WIDE SQUEEZE
The wide-screen image will be displayed in full screen in its native aspect ratio and so does the
4:3 image but with black borders on the left and the right side.
Notes:
● The visible picture size is preset on the DVD disc. Therefore the playback picture of some
DVD discs may not conform to the picture size you select.
● When you play DVD discs recorded in the 4:3 aspect ratio, the playback picture will always
appears in the 4:3 aspect ratio regardless of the TV shape setting in the function setup menu.
* Angle Mark
ON: T o show angle mark when a disc with multiple camera angles is playing. Y ou can view
different camera angles of a DVD disc by pressing ANGLE button on remote control.
OFF: T o hide angle mark.
NOTE: This function is only available for discs encoded with multiple camera angles.
* OSD Language
T o select the language of unit’s menus.
* Closed Captions
Some discs have closed captions.
ON: Show the closed captions.
OFF: Hide the closed captions.
* Screen Saver
T o set screen saver ON or OFF .
* AUT O ST ANDBY(Automatic turn off)
This function allows you to select the standby setting:
OFF: The unit will not switch to standby mode.
3 H: If no button is pressed within 3 hours, the unit will switch to standby mode automatically .
4 H: If no button is pressed within 4 hours, the unit will switch to standby mode automatically .
Analog Audio Setup Page
GB - 10 GB - 1 1 GB - 12 GB - 13 GB - 14
GB - 15 GB - 16 GB - 17 GB - 18 GB - 19
* Downmix
L T/RT : left and right soundtrack audio output.
STEREO: Stereo audio signal output
* DOLBY DIGIT AL
** DUAL MONO
T o select STEREO, L-MONO (left mono), R-MONO (right mono) and MIX- MONO for Dolby
Digital output.
** DYNAMIC
● T o control the different sound levels via dynamic compression. It improves the quality of the
sound track at a low volume, and quiets the loudest sounds.
● This function is available only on DVD discs recorded in Dolby Digital.
Video Setup Page
* BRIGHTNESS: T o adjust the video brightness level on a scale of -16 to +16.
* CONTRAST : T o adjust the video contrast level on a scale of –16 to +16.
* HUE: T o adjust the color hue level on a scale of –9 to +9.
* SA TURA TION: T o adjust the color saturation level on a scale of -9 to +9.
* DIVX VOD
Some DivX Video-On-Demand les required registration code, please get the code of your
DVD player .
Registration code is for DivX Video-On-Demand only , do not apply this code for another
applications or websites.
Preference page
Noted: The preferences Setup menu is only available at stop mode.
* TV TYPE
● T o select your TV system among PA L , AUTO or NTSC.
* AUDIO
● T o select the dialog language.
● If the selected language is not available on the disc, the disc’s language will be used instead.
● T o change the dialog language during playback, press AUDIO on the remote control.
* SUBTITLE
● T o select the language of the DVD subtitles. Select “OFF” to turn off the subtitles.
● If the selected language is not available on the disc, the disc’s language will be used instead.
● T o change the subtitle language during playback, press SUBTITLE on the remote control.
* DISC MENU (menu language)
● T o select the language of the DVD menus.
● If the selected language is not available on the disc, the disc’s language will be used instead.
* P ARENT AL
Some DVD discs are equipped with a password function and are rated according to their content.
The contents allowed by parental lock level and the way a DVD disc is controlled may vary
from disc to disc. For example, if the disc allows, you could lock-out violent scenes unsuitable
for children or you could lock out playback of the disc altogether .
Y ou cannot play DVD discs rated higher than the level you selected unless you cancel the
parental lock function.
The parental lock levels are equivalent to the following ratings.
Level 1 : Kid Safe
Level 2 : G
Level 3 : PG
Level 4 : PG-13
Level 5 : PG-R
Level 6 : R
Level 7 : NC17
Level 8 : Adult
* MPEG4 SUBTITLE
If your MPEG4(DivX) video le includes subtitle le, use this to select your preferred subtitle
language.
* DEF AUL T
Pressing ENTER with this function selected resets all settings to their initial factory state, except
for parental level and password.
Password Setup Page.
* P ASSWORD MODE
T o turn the password mode ON/OFF .
* P ASSWORD
This option allows you to set or change the password.
Use ▼, ▲ button to select “P ASSWORD”, press ►button to highlight “CHANGE”, then press
the ENTER button. Press the number buttons to input your 4-digit password until to “OK” (If the
password has not been set yet after you purchase this unit, it is “1369”).
SAFETY INSTRUCTION
A TTENTION: T o reduce the risk of electric shock, do not remove
the cover or back. There are no user serviceable parts inside the
unit. Refer all servicing to qualied personnel.
The lightning ash with arrowhead symbol within the triangle is a warning sign
alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to
beam. Class 1 laser product.
IMPORT ANT SAFETY PRECAUTIONS
SAFE USE OF YOUR EQUIPMENT
Here are a few tips to help you do this:
READ this instruction manual before you attempt to use the equipment.
NEVER t make shift stands or legs with woodscrews. Use only approved supports and fasteners
specially designed for the equipment.
NEVER let anyone, especially children, push objects into holes, ventilation slots or any other
opening; this could result in fatal electric shock!
A LWAYS disconnect the Car power adaptor when you are not going to use the unit for a long
period of time.
ENSURE that all electrical connections (including the mains plug, extension leads and
interconnections between pieces of equipment) are properly made in accordance with the
instructions given. Switch off the main supply when making or changing connections.
CONSUL T your dealer if you are ever in doubt about the installation, operation or safety of
your equipment.
DON’T continue to operate the equipment if it is damaged in any way or if it does not function
normally . Disconnect the Car power adaptor and consult your dealer.
DON’T leave equipment switched on when it is unattended unless it is part of it’s normal function
to operate in your absence, for example a video cassette recorder with timed recording facility .
LISTEN to headphones at moderate volume levels; high volume levels can permanently
damage your hearing.
W ARNING:
● Car power adaptor is used as the disconnect device. It shall remain readily operable and
should not be obstructed during intended use. T o be completely disconnected the apparatus
from supply mains, the car power adaptor of the apparatus shall be disconnected from the
mains socket outlet completely .
● Never use a power adaptor that is damaged, route power lead in a safe manner and make
sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a
qualied service agent.
● Place the unit on a at and even surface.
● Do not restrict the air ow of the unit by placing it in a place with poor air ow , by covering it
with a cloth, or by placing it on carpeting.
● T o avoid magnetized, do not place the unit near speaker or magnet.
● Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht, etc)
where it would be exposed to high temperatures above 40°C.
● It also should not be placed in temperatures less than 5°C or greater than 35°C.
● No naked ame sources such as lighted candles should be placed on the AC adaptor and
main unit.
● Do not use the unit immediately after transportation from a cold place to a warm place,
condensation problem may result.
● The ventilation should not be impeded by covering the ventilation openings with items such
as newspapers, table-cloths, curtains, etc.
● No naked ame sources, such as lighted candles, should be placed on the apparatus.
● The use of apparatus in moderate climates.
● The apparatus should not be exposed to dripping or splashing.
MAINTENANCE
PLACEMENT
Mounting bracket
Headrest bracke
with screws
Connecting shaft
Joint rotation
fastenin
knob
Knob screw
Back holder
Cleaning
Be sure to turn the unit off and disconnect the car power adaptor before maintaining
the unit.
* Use a soft, dry , clean cloth. Regularly dust the vents at the back or sides.
* Using solvents, abrasive or alcohol-based products risks damaging the appliance.
* If an object or liquid enters inside the appliance, unplug it immediately and have it checked
by an authorized engineer .
Note on disc
* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in
malfunctions.
* Do not place more than one disc in the disc compartment.
* Do not try to open the disc compartment during playing.
* Do not touch the lens. Doing so may cause malfunction.
* If there is a scratch, dirt or ngerprints on the disc, it may cause tracking error . Before playing,
clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t store discs in
places with high temperatures or high humidity , they can become warped. After playing, store
the disc in its case.
Important Note
* Before transporting the unit, remove the disc from the disc compartment.
Mounting in the V ehicle
Use the supplied car mounting brackets to install the main unit and monitor on the back of the
vehicle’s headrests.
1. Remove the 4 screws on the headrest
bracket. Fix the headrest bracket into the
steel pipes of the vehicle’s headrest using
these screws.
2. Fix the back holder and connecting shaft
through the joint rotation fastening knob.
3 . Combine the holder into the headrest
bracket.
4. Fix the main unit or monitor to the back
holder using the knob screws.
Caution!
- Make sure the screws are properly locked to avoid accidental loosening.
- Always remember to lock the holder to ensure the safety of your passengers.
- Do not install when car travels.
5. Connect the 12V car plug as shown.
CAUTION: Using other car plugs could damage the unit.
SAFETY W ARNING!
• On no account should this unit be used by the driver of a moving motor vehicle, or left unsecured
in the vehicle whilst driving.
• If this unit is being used by a passenger in your vehicle, be sure that it is secured or held safely ,
and does not obstruct any safety device (i.e. airbag, seat belt etc.) that is tted.
• All passengers should wear seat belts when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
• Using other car power adaptors could damage the unit.
TROUBLE SHOOTING
No power .
● Ensure the car power adaptor is connected.
● Make sure that the unit is turned on.
The remote control does not function.
● Make sure the infrared remote sensor is not blocked.
● Point the remote directly at the infrared remote sensor on the unit.
● Replace the battery in the remote with a new one.
V ery little or no sound is coming from a DVD.
● Make sure that the unit is turned ON.
● Make sure the unit is not paused. Press .
● Make sure the unit is not in fast-forward or fast-reverse mode. Press .
● Make sure that the connections are correct.
* Make sure the MUTE function is not on.
The player does not start playback
● Insert the disc with the printed side facing you.
● Check that the disc can actually be played by this device.
● Check that the disc’s regional code matches the player’s regional code. This player ’s regional
code is 2.
● Clean the disc.
The picture is not clear .
● The DVD is dirty . Gently clean the disc.
● The disc is scratched.
● Please adjust the LCD’s brightness and contrast in LCD mode.
Forget Password
If you forget your own password, enter “1369” to reset.
Specications and appearance are subject to change without notice.
● Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.
● Do not place objects lled with liquids, such as vases, on the apparatus.
● The marking plate is located on the back of unit.
● Attention should be drawn to the environmental aspects of battery disposal.
● Do not throw batteries in re!
● Battery shall not be exposed to excessive heat such as sunshine, re or the like.
● Excessive sound pressure from earphones and headphones can cause hearing loss.
● Under the inuence of electrical fast transient or/and electrostatic phenomenon, the product
may malfunction and require user to power reset.
GOTO VIDEO SETUP PA GE
GOTO PREFERENCE P AGE
MPEG4 SUBTITLE WE S
M-990CVB/IB/V2
DVP-3577 IB MUSE 001 REV2- GB.indd 2 2016/8/12 9:44:34