667807
15
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
DIMMER
DIMMER function makes it possible to adjust the brightness level of the
front panel display.
Bright: Above normal level of display brightness.
Normal: Normal level of display brightness.
Dim: Below normal level or dimmer than normal display brightness.
NETWORK STANDBY
Network Standby mode maintains network connection at standby mode
with reduced system performance level.
On: Network connection is maintained at standby mode.
O: Network connection is disconnected at standby mode.
Refer also to table below about “OPERATING MODE TRIGGER POINTS”.
AUTO STANDBY
Auto Standby feature is an integral feature of C 388 that conforms to
European ecodesign regulations. The C 388 can be setup to automatically
go to standby mode if there is no user interface interaction and no active
source input within 20 minutes.
ON
C 388 switches to standby mode at lowest power consumption (less
than 0.5W) if there is no user interface interaction and no active source
input within 20 minutes.
OFF
C 388 remains at operating mode even if there is no user interface
interaction and no active source within 20 minutes.
Refer also to table below about “OPERATING MODE TRIGGER POINTS”.
AUTO SENSE
Auto sense feature enables the C 388 to wake up from standby mode
when triggered by network connected App or active source input.
ON
Unit wakes up from standby mode when triggered by network
connected App or active source input.
Except for analog input, the unit will power up to the Source that
activated the unit to operating mode.
When the unit is triggered by an active analog input, the unit will
always power up to Line 1.
OFF
Unit remains at standby mode even if it is triggered by network
connected App or active source input.
Refer also to table below about “OPERATING MODE TRIGGER POINTS”.
OPERATING MODE TRIGGER POINTS
SETTINGS OPERATING MODE TRIGGER
Auto Standby: On
Network Standby: On
Auto Sense: On
Unit switches back to operating mode by
resuming activity at network connected app.
an active source input.
pressing front panel Standby button or SR 9 remote
control’s [ON] button.
Auto Standby: On
Network Standby: O
Auto Sense: On
Unit switches back to operating mode by
an active source input.
pressing front panel Standby button or SR 9 remote
control’s [ON] button.
Auto Standby: On
Network Standby: On/O
Auto Sense: O
Unit remains at standby mode even if it is triggered
by network connected App or active source input.
Unit can only be switched back to operating mode by
pressing front panel Standby button or SR 9 remote
control’s [ON] button.
OPERATION
USING THE C 388
Auto Sense
SettingsSource Setup
Off
Settings
Auto Standby
SettingsSource Setup
On
Settings
Dimmer
SettingsSource Setup
Bright
Settings
Network Standby
SettingsSource Setup
Off
Settings
15
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD C 388 Hybrid Digital DAC Amplifier wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD C 388 Hybrid Digital DAC Amplifier

NAD C 388 Hybrid Digital DAC Amplifier Bedienungsanleitung - Deutsch - 20 seiten

NAD C 388 Hybrid Digital DAC Amplifier Bedienungsanleitung - Holländisch - 22 seiten

NAD C 388 Hybrid Digital DAC Amplifier Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info