Bedienungsanleitung NAD C 390 DD (Seite 17 von 26) (Englisch)

493504

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

LISTENING MODE

Listening Mode

}~Stereo

`Mono

`Reversed

The C 390DD oers distinct listening modes, tailored for dierent types

of recording or program material. The following listening modes can be

selected.

STEREO

• Select “Stereo” when you wish to listen to a stereo production, such as

music CD or FM broadcast.

• Stereo recordings whether in PCM/digital or analog form and whether

surround-encoded or not encoded, are reproduced as recorded.

• Multi-channel digital recordings (Dolby Digital and DTS) are reproduced

in “Stereo Downmix” mode via the left and right speakers only.

MONO

• Use “Mono” listening mode when the audio source format is mono. The

mono information is replicated on both left and right channels.

• Mono” listening mode is recommended when watching old movies

with mono soundtrack, listening to recorded monaural sound sources

such as AM radio broadcasts or with the foreign language soundtracks

recorded in the left and right channels of some movies.

• Mono is also very helpful when setting up a stereo system to check that

both speakers are connected with correct polarity. Correctly connected

speakers will have a solid center image and strong bass response. If one

speaker has the input connections (+ and -) reversed, the image will be

indistinct and the bass will be reduced and uneven sounding.

REVERSED

• Sends the right channel to the left speaker and the left channel to the

right speaker. This can easily correct a reversed input connection or

incorrectly recorded music source.

SPEAKER COMPENSATION

Speaker Compensation

`2 ohms

}~4 ohms

`5 ohms

Speaker Compensation

}`6 ohms

`7 ohms

`8 ohms

Speaker Compensation

}`>8 ohms

Digital impedance compensation lter allows ne tuning of the top

octave to match the speaker impedance. This will result in perfectly at

frequency response at 20 kHz. The eect of this lter may not be audible*

but it is measurable, and it compensates for the small eect of the digital

reconstruction lter that eliminates the 844 kHz sampling frequency of the

amplier.

*The exception may be some electrostatic speakers that have very low

impedance at high frequency. The lower the HF impedance, the greater the

deviation from at response.

PRE OUT/SUBWOOFER

}Pre Out

Subwoofer

Pre Out

}~Enable

`Disable

Subwoofer

`Enable

}~Disable

Set the assignment of the rear panel output port PRE OUT/SUBW to either

PRE OUT or SUBWOOFER. If PRE OUT is selected and enabled, SUBWOOFER

is automatically disabled and vice-versa.

IMPORTANT NOTE

Subwoofer cannot be enabled if the speakers are set to “Speakers OFF”.

OPERATION

USING THE C 390DD

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 390 DD Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 390 DD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info