Bedienungsanleitung NAD C 565 BEE (Seite 11 von 16) (Englisch)

493510

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

CD-R AND CD-RW AUDIO DISCS

The C 565BEE can play back CD-R or CD-RW audio discs that have been

recorded on a computer or CD recorder. The quality of CD-R or CD-RW

audio discs varies widely which may aect playability. Some factors that

aect playability:

• The quality of the disc itself. Generally speaking, CD-R or CD-RW blanks

from well-renowned companies give better results than unbranded

ones.

• The quality of CD-recorder or computer CD re/writer. Some recorders

and writers produce better results than others.

• The CD-R and CD-RW were created with high-speed writing. In general,

the quality of a CD-R or CD-RW is better when produced at a lower

speed against a higher speed on the same recorder or re/writer.

PLAYING MP3/WMA FILES

The C 565BEE can play MP3/WMA formatted recordings on CD-R or CD-RW

discs. You may mix any of the le types on the disc. Using the CD 9 remote

control, one can select through the MP3/WMA folders and les as well as

start playback through the following steps

1 Load the applicable disc.

2 Press [FOLDER ] to select desired folder. Press [ENTER].

3 Press [FILE ] to select desired le number. Press [ENTER] to start

playback.

NOTES

• The le number is recognized per disc, not per folder – that is, the

number assigned to each le corresponds to their sequence in the disc.

• If you want to select le number “119” in a disc where there are 100 or

more MP3/WMA les, press “1” twice and then “9.”

• During disc playback, it is possible to select through the folder or le lists

(using [FOLDER ] or [FILE ] buttons) without interrupting the

current le being played back.

IMPORTANT NOTICE

Customers should note that permission is required in order to download

MP3/WMA les and music from the Internet. NAD ELECTRONICS

INTERNATIONAL has no right to grant such permission. Permission

should always be sought from the copyright owner.

PROGRAMMING

The program function enables you to store your favorite tracks from any

disc in the player memory. When programming a sequence of tracks, the

C 565BEE must be in STOP mode. Using the CD 9 remote control, enter your

desired program sequence through the following steps

1 Press [PROG]. The display indicates “P00 T000”. The “000” in the “T000” keeps

on blinking, meaning that the player is awaiting the rst Program entry.

2 Use the Direct-Entry numeric keypad buttons to enter the rst track

in your planned sequence. Upon entering the track number, the VFD

will briey show the total number and total time of the currently

programmed tracks like “01 3:25”.

3 The display will revert to show “P02 T000,” indicating that the player is

ready for your second program entry. Upon entering the second track,

the VFD will again briey show the total number and total time of the

currently programmed tracks like “02 6:45” – “02” indicates that there are

now a total of two programmed tracks and “6:45” is the total playback

time of both programmed tracks.

4 Repeat steps 2 and 3 to select and store other track numbers in

memory, up to a maximum of 40 entries. If you attempt to program

more than 40 tracks or les, “P-FULL” will be displayed in the VFD.

5 Press [PROG] to end or nalize the program – the VFD will show the last

programmed number and track.

6 Press [ ] to start playback of the rst programmed track. Rotate [PLAY/

PAUSE/SKIP] if you wish to SKIP forward/backward the programmed tracks.

NOTES

• Programming of MP3/WMA les is the same as above procedure except

that there will be no brief display of the total number and total time of

currently programmed les upon entering the desired le number to be

programmed (refer to item 3 above).

• If you want to select le number “119” in a disc where there are 100 or

more MP3/WMA les, press “1” twice and then “9.”

• Pressing [ ] key at any time during the programming procedure will

put to a STOP to the sequence and clear all the currently programmed

tracks or les. VFD will revert back to displaying the total number of

tracks and total playback time for audio CD and total number of les for

MP3/WMA.

• Pressing [ ] key twice during program playback will result to having

the whole program list deleted.

REVIEW/EDIT PROGRAM LIST

1 Initiate review of your programmed entries by pressing [PROG].

• If you are still in programming mode, press [PROG].

• If during program playback, press [ ] once, then [PROG].

2 The VFD will show the rst Program Number and the corresponding

“blinking” programmed track.

3 To change the programmed track of a particular sequence, use the

Direct-Entry numeric keypad buttons. Press [SKIP ] to move

forward or backward the programmed tracks as well as review the list

and change if so desired.

4 If you want to delete a particular program sequence during program

review, press [CLEAR] key.

5 After nalizing your program changes or completing your review, press

[PROG] again.

PROGRAM PLAYBACK

1 To play the stored program, press [ ] while you are in “PROGRAM”

mode. “PROG” icon will appear in the display, indicating that a stored

program is being played. During Program Play, the SKIP buttons will

access only the tracks in the program list.

2 If you want to play only a portion of a stored program, initiate play and

press SKIP to jump over the programmed tracks that you don’t want to

hear.

STOP OR DELETE PROGRAM

1 To terminate Program play, press [ ] once. The stored track list remains

in memory. If you want to play the program again, simply press [ ].

2 To clear the program memory, perform any of the following steps

• Press [ ] twice during program playback.

• Press [ ] to open the disc tray.

• Switch OFF the C 565BEE by pressing the Standby button.

• Switch to another source other than CD mode by pressing the front

panel’s [SOURCE] button or [USB} / [OPT} source buttons on the

CD 9.

OPERATION

USING THE C 565BEE  CD MODE

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD C 565 BEE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 565 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info