Bedienungsanleitung NAD C 725 BEE (Seite 17 von 24) (Englisch)

493509

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

STATION ORDER

Use “Station Order” to sort the sequence of the listed stations. There are

three orders – Alphanumeric, Ensemble and Active.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE ] to select “Station Order”. Press [ENTER].

2 Toggle [TUNE ] to select through “Alphanumeric”, “Ensemble” and

“Active”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio stations are

arranged in the order of their ensemble names.

NOTE

Ensemble is also interchangeably termed as “multiplex” by other

broadcast providers.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

DRC

The level of compression of stations can be set to eliminate the dierences

in dynamic range or sound level between radio stations. Popular music

would normally be more compressed than classical music, resulting in

possible dierent audio levels when changing from one station to the

other. Setting the DRC to “0” means no compression, “1/2” indicates medium

compression and “1” shows maximum compression. No compression is

recommended, especially for classical music.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE ] to select “DRC”. Press [ENTER].

2 Toggle [TUNE ] to select through “DRC 0”, “DRC ½”and “DRC 1”.

3 Press [ENTER] to select desired DRC level.

MANUAL SCAN

This option allows you to directly tune to a desired channel and include it

in the service list (if not yet available at the time). You can also use manual

scan to assist you in positioning the DAB antenna for best reception of the

desired channel.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE ] to select “Manual Scan”. Press [ENTER].

If you are doing manual scan the rst time, the rst order of channel

and frequency will be shown in the upper line of the VFD. If you had

previously done manual scanning, the last channel and frequency that

you have manually scanned will be shown.

2 Channel and frequency are shown in the upper line of the VFD. The “bars”

at the lower line of the VFD indicate the signal strength level of the current

channel. To improve the reception of the selected channel, adjust or

reposition the DAB antenna until the best reception is indicated.

3 To select other channels, toggle [TUNE ] to step through the channel

list. Release [TUNE ] when you have arrived at your desired channel.

4 Press [ENTER] to tune the selected channel.

NOTE

The number of ensembles and stations that could be scanned will vary

depending on your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE ] to select “Prune List”.

2 Press [ENTER]. Any inactive stations are automatically deleted.

RESET

The “Reset” option allows the connected (and separately sold) NAD DAB

Adaptor DB1 to be reset to its factory default settings.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE ] to select “Reset”.

2 Press [ENTER]. “Reset? No” will be shown in the lower line of the VFD.

Press [TUNE ] to switch to “Reset? Yes” option.

3 To select “Reset? No” or “Reset? Yes”, press [ENTER] while at the desired

option. Selecting “Reset? Yes” will cause the DB1 to be reset to its factory

default settings - the VFD will correspondingly show “No Service List”.

OPERATION

LISTENING TO DAB RADIO

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 725 BEE Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 725 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info