Bedienungsanleitung NAD M 2 (Seite 5 von 14) (Englisch)

493487

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

INTRODUCTION

GETTING STARTED

QUICK START

In case you simply cannot wait to experience the performance of your new

NAD M2 Direct Digital Amplier, we provide the following QUICKSTART

instructions to get you underway.

Please make all the connections to your M2 with the unit unplugged

from the AC outlet. It is also advisable to power-down or unplug all

associated components while making or breaking any signal or AC power

connections.

1 Connect your speakers to the LEFT and RIGHT speaker terminals and

input sources to the applicable M2 rear panel input sockets.

WARNING

The M2 employs a “oating” ground design. External devices (such as

speaker switching or headphone adaptors) that connect the left and

right channels together must not be used with the M2. Left and right

channels must never be connected to each other.

2 Make sure that the OFF/AUTO trigger switch at the M2 rear panel is set

to OFF. Connect the AC cord to M2’s AC Mains input and then plug into

an AC outlet.

WARNING

For optimal performance, the M2 requires a grounded AC receptacle or a

separate earth ground. Ensure the proper grounding of your system.

3 Set the rear panel POWER switch to the “ON” position. The Standby LED

will illuminate amber (standby mode).

4 Press the front panel STANDBY button to turn ON the M2. The Standby

LED indicator will turn from amber to blue and illuminate the VFD.

5 Press the corresponding front panel input button of your preferred

source input.

SAVE THE PACKAGING

Please save the box and all of the packaging in which your M2 arrived.

Should you move or otherwise need to transport your M2, this is by far the

safest container in which to do so. We’ve seen too many otherwise perfect

components damaged in transit for lack of a proper shipping carton, so

please: Save that box!

NOTES ON INSTALLATION

Your NAD M2 should be placed on a rm, level surface. Avoid placing the

unit in direct sunlight or near sources of heat and damp. Allow adequate

ventilation. Do not place the unit on a soft surface like a carpet. Do not

place it in an enclosed position such a bookcase or cabinet that may

impede the air-ow through the ventilation slots. Make sure the unit is

switched o before making any connections.

Use high quality leads and sockets for optimum performance and reliability.

Ensure that leads and sockets are not damaged in any way and all sockets

are rmly pushed home. For best performance, use quality speaker leads of

16 gauge (1.5mm) thickness or more.

Should water get into your NAD M2, shut o the power to the unit and

remove the plug from the AC socket. Have the unit inspected by a qualied

service technician before attempting to use it again.

DO NOT REMOVE THE COVER; THERE ARE NO USERSERVICEABLE

PARTS INSIDE.

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M 2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info