Bedienungsanleitung NAD M12 (Seite 11 von 22) (Englisch)

667813

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

DISPLAY MENU OPTIONS

The following display options are accessible via the touch panel display -

Main, Media, Mode, EQ and Setup.

Below are sample screenshots of these options along with descriptions of

applicable functions or features.

MAIN

Coax 1: Current Source.

-20.0 dB: Volume level.

: Go to previous or next Source.

48k: Sample rate.

Mono: Listening mode.

Negative: Polarity setting.

Tone: Tone control settings enabled.

Balance: Balance settings enabled.

Sub Stereo: Subwoofer mode setting.

LPF 200Hz, HPF 200Hz: Subwoofer frequency setting.

MEDIA

“Media” becomes accessible only when the selected Source is “USB Front”

or “USB Back”. If no external USB mass storage device is connected to USB

Front or USB Back input, “Please Insert Device” will be shown in the touch

panel display.

With an external USB mass storage device connected to either USB Front

or USB Back input, MP3, WMA or FLAC les or folders will be shown in the

touch panel display. Select desired le to playback.

If the connected USB mass storage device does not contain any applicable

MP3/WMA/FLAC les, “No les” will be shown in the touch panel display.

Refer also to the items about “USB MODE” and “LISTENING TO USB DEVICE”

at the “OTHER FEATURES” section of the “OPERATION” page.

MODE

The M12 oers distinct listening modes, tailored for dierent types of

recording or program material. The following listening modes can be

selected.

STEREO

• Select “Stereo” when you wish to listen to a stereo production, such as

music CD or FM broadcast.

• Stereo recordings whether in PCM/digital or analog form and whether

surround-encoded or not encoded, are reproduced as recorded.

• Multi-channel digital recordings (Dolby Digital and DTS) are reproduced

in “Stereo Downmix” mode via the left and right speakers only.

MONO

• Use “Mono” listening mode when the audio source format is mono. The

mono information is replicated on both left and right channels.

• “Mono” listening mode is recommended when watching old movies

with mono soundtrack, listening to recorded monaural sound sources

such as AM radio broadcasts or with the foreign language soundtracks

recorded in the left and right channels of some movies.

• Mono is also very helpful when setting up a stereo system to check that

both speakers are connected with correct polarity. Correctly connected

speakers will have a solid center image and strong bass response. If one

speaker has the input connections (+ and -) reversed, the image will be

indistinct and the bass will be reduced and uneven sounding.

REVERSED

• Sends the right channel to the left speaker and the left channel to the

right speaker. This can easily correct a reversed input connection or

incorrectly recorded music source.

POLARITY

Allow compensation for recordings that have reversed polarity.

• Positive: A positive sine wave at the input remains positive at the

output. Polarity is defaulted to “Positive” setting.

• Negative: A positive sine wave at the input is negative (inverted) or

reversed at the output.

OPERATION

USING THE M12

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M12 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info