Bedienungsanleitung NAD M12 (Seite 13 von 22) (Englisch)

667813

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

When a Slot line item is selected, the following menu options will manifest.

Enabled: Source input can be enabled (ON) or disabled (OFF).

VOLUME CONTROL

The M12 VOLUME control function is dependent upon the “Volume

Control” menu setting. Volume control can either be set to “Fixed” or

“Variable”. Select “Save” to store selected “Volume Control” and “Fixed Level”

or “Variable” settings.

Fixed

If “Volume Control” is set to “Fixed”, audio output level is xed and the

M12’s volume control is bypassed.

• Set “Fixed Level” to desired preset dB level. Audio output is xed

to the selected level after saving the setting. Audio output level

through ANALOG AUDIO OUTPUT will not change when using the

Volume control or HTRM 2’s [VOL R/T].

• At “Fixed Level” setting, the volume control or HTRM 2’s [VOL R/T]

will have no eect and eectively disabled.

Variable

• When set to “Variable”, audio output level through ANALOG AUDIO

OUTPUT is directly adjustable using the volume control or HTRM 2’s

[VOL R/T].

Name: Source input name. Selecting this line item will lead to the menu

keyboard where one can type the preferred name for the current source.

The following additional menu options are included if BALANCED, SINGLE-

ENDED or PHONO input is selected.

Analog Gain: -12dB to 0dB. Gain adjustment allows all sources to play

back at the same volume level so you don’t need to adjust the volume

every time a new source is selected. It is generally preferable to reduce the

level of the loudest source rather than making louder the softer sources.

Sample Rate (48 kHz, 96 kHz, 192 kHz): Select the user’s preference

for sample rate of the Analog-to-Digital Converter. Higher sampling rates

allow for anti-aliasing lters to take eect further outside the audible

frequency range and are generally considered to sound better, especially in

the high frequencies.

PHONO

Aside from above common menu options (Enabled, Name, Volume Control,

Analog Gain and Sample Rate), there is one more option distinct for

PHONO. This is the Phono Mode.

Phono Mode: Select MM (Moving Magnet) or MC (Moving Coil)

depending upon the Phono cartridge type being used. This feature

matches the impedance of the Phono input to the cartridge type.

DIGITAL OUTPUT

SAMPLE RATE 48 KHZ, 96 KHZ, 192 KHZ

Audio inputs may come from various sources with dierent sampling rates.

Select 48 kHz, 96 kHz or 192 kHz to convert all digital audio output content

to single sampling rate.

CONTROL SETUP

AUTO STANDBY

Allows the option of the M12 going to standby mode after 30 minutes of

inactivity or remain at operating mode regardless of any source activities.

ON: M12 will automatically go to standby mode if there are no user

interface interaction and no active source within 30 minutes.

OFF: M12 remains at operating mode even if there is no user interface

interaction and no active source within 30 minutes. This is the default setting.

OPERATION

USING THE M12

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M12 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info