Bedienungsanleitung NAD M15 HD2 (Seite 11 von 45) (Englisch)

745041

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

12 DIGITAL AUDIO IN (COAXIAL IN 1-4, OPTICAL IN 1-4)

• Connect to the corresponding optical or coaxial digital output of

sources such as CD or BD/DVD players, digital cable box, digital

tuners and other applicable components.

• Coaxial and Optical digital input association is congurable via the

Source Setup item of the Setup Menu OSD.

DIGITAL AUDIO OUT (COAXIAL OUT 1-2, OPTICAL OUT 1-2)

• Connect the optical or coaxial DIGITAL OUT to the corresponding

digital audio input of compatible devices such as receivers,

computer soundcard or other digital processors.

13 ETHERNET/LOCAL AREA NETWORK (LAN) PORT

LAN connection must be setup for wired connection to be established.

Set up a Wired Ethernet broadband router with broadband internet

connection. Your router or home network should have a built-in DHCP

server to consummate the connection.

• Using a standard straight-through Ethernet cable, connect one

end of the Ethernet cable to the LAN port of your wired Ethernet

broadband router and the other end to M15 HD’s LAN port.

• This Ethernet connection has similar function as that of the RS232

connection. With your PC and the M15 HD on the same network,

it allows remote control of the M15 HD via compatible external

controllers.

• With your PC and M15 HD connected on the same network, the IP

address of your M15 HD can be obtained. Press together and then

release the front panel buttons [3 SOURCE] and [SOURCE 4] -

“System Info” is shown in the VFD and OSD. Toggle [3 SOURCE] or

[SOURCE 4] to individually show in the VFD the “System Info” details

which include the IP address.

• Refer to the NAD website for information about RS232 Protocol

documents and PC interface program.

NOTES

• NADisnotresponsibleforanymalfunctionoftheM15HDand/orthe

internetconnectionduetocommunicationerrorsormalfunctions

associatedwithyourbroadbandinternetconnectionorotherconnected

equipment.ContactyourInternetServiceProvider(ISP)forassistanceor

theservicebureauofyourotherequipment.

• ContactyourISPforpolicies,charges,contentrestrictions,service

limitations,bandwidth,repairandotherrelatedissuespertinentto

internetconnectivity.

14 HDMI (HDMI IN 1-6, HDMI MONITOR OUT 1-2)

• Connect the sets of HDMI input to the HDMI OUT connectors of

source components such as DVD player, BD player or HDTV satellite/

cable box.

• Connect the HDMI MONITOR OUT 1 and/or HMDI MONITOR OUT

2 to compatible HDTV or projector with HDMI input. Both HDMI

output ports display simultaneously the same audio/video source.

WARNING

 BeforeconnectinganddisconnectinganyHDMIcables,boththeM15

HDandtheancillarysourcemustbepoweredOFFandunpluggedfrom

theACoutlet.Failuretoobservethispracticemaycausepermanent

damagetoallequipmentconnectedviaHDMIsockets.

15 UNSWITCHED AC OUTLET

• With M15 HD switched ON or at standby mode, mains power is

always available at this outlet.

• This outlet can be used for components that may require

continuous supply of AC mains; some tuners require uninterrupted

mains supply to retain preset memory, for instance.

• The total draw of all devices connected to this outlet must not

exceed 120 watts.

• Mains power at this outlet can be shut down by switching OFF the

M15 HD via the rear panel POWER switch.

16 AC MAINS INPUT

• The M15 HD comes supplied with a separate detachable mains

power cord. Before connecting the plug to the mains powers

source, connect rmly rst the other end to M15 HD’s AC Mains

input socket.

• Always disconnect the mains power plug from the mains power

source rst, before disconnecting the cable from the M15 HD’s AC

Mains input socket.

• Connect only to the prescribed AC outlet, i.e., 120V 60 Hz (for 120V

version models only) or 230V 50 Hz (for 230V version models only).

17 POWER

• Supply the AC mains power to the M15 HD.

• When the POWER switch is set to ON position, the M15 HD goes

to standby mode as shown by the amber status condition of the

Standby LED. Press the front panel Standby button or HTRM remote

control’s [ON] button to switch ON the M15 HD from standby mode.

• If you intend not to use the M15 HD for long periods of time (such

as when on vacation), switch o the POWER switch.

• With POWER switched o, neither the front panel Standby button

nor HTRM remote control’s [ON] button can activate the M15 HD.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M15 HD2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M15 HD2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info