Bedienungsanleitung NAD M17 AV (Seite 26 von 38) (Englisch)

562261

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

DTS NEO: 6™ SURROUND

This mode applies the conventional 2-channel signals such as digital PCM

or analog stereo signals to the high precision digital matrix decoder used

for DTS-ES Matrix 6.1 to achieve 6.1-channel surround playback. DTS Neo: 6

surround includes two modes for selecting the optimum decoding of the

signal sources:

DTS NEO: 6 CINEMA: This method is ideal for the reproduction of

movies. The decoding takes place by emphasizing the separation

in order to achieve the same atmosphere with 2-channel, as with

6.1-channel sources.

DTS NEO: 6 MUSIC: Mainly recommended for music reproduction. The

right and left front channels do not pass through the decoder and are

reproduced directly so there is no loss in sound quality, and the eects

of the right surround, left surround, central and back surround channels

add a natural sensation of expansion of the sound eld.

ENHANCED STEREO

Please refer to the same description of “ENHANCED STEREO” under the

“LISTENING MODES” segment of the “OPERATION - USING THE M17 - MAIN

MENU”.

DISPLAY SETUP

The “Display Setup” menu allows adjusting the brightness of the Vacuum

Fluorescent Display (VFD) and availability of On-Screen Display (OSD).

NOTE

The congurations set forth at “Display Setup” are carried over whenever

it is enabled during A/V Preset setting. Please see also the section below

about “AV Presets”.

Brightness: Reduce or increase brightness level of the VFD. “1” is the

lowest brightness level and “3” the highest brightness setting.

Temp Disp: This applies to the OSD that is temporarily shown at video out

whenever any of the front panel controls or their corresponding keys in the

remote control is activated. Set to “On” if it is desired to show the applicable

OSD at the monitor/TV; otherwise, select “O”.

A/V PRESETS

The M17’s simple but powerfully exible system of “A/V Presets” allows

you to customize virtually every aspect of your audio-video playback, and

recall them with a single key-press. The parameters “Listening Mode”, “DSP

Options” and “Tone Controls” accessible via the “Main Menu” together with

“Speaker Setup” and “Display Setup” congurable through “Setup Menu” are

stored together as a single A/V Preset.

You might create one A/V Preset optimized for pop music and another for

classical. One more A/V Preset can be set up to recall each family member’s

favorite setting or one for fully cinematic home-theater playback and yet

another one for late-night movies, with each A/V Preset ne-tuned to a

particular scenario or preference.

CREATING PRESETS

Creating an A/V Preset consists simply of storing a complete set of the

parameters set forth in “Listening Mode”, “DSP Options” and “Tone Controls”

accessible via the “Main Menu” together with “Speaker Setup” and “Display

Setup” congurable through “Setup Menu”.

Scroll to “A/V Presets” using the [R/T] keys to save a collection of said

parameter settings to a Preset. Select a Preset number and by pressing the

[R/T] keys, you can selectively include in the particular A/V Preset any of

the above-mentioned parameter settings by choosing “Yes”. If you decide

not to include in the particular A/V Preset a certain parameter setting, select

“No”.

Now in order to save the settings chosen for the particular A/V Preset

number, scroll down to “Save Current Setup to Preset” and press the [E]

key. If you chose to load instead the default settings, scroll down to “Load

Defaults to Preset” and press the [E] key to restore the default settings.

In addition to the parameter settings, the A/V Preset label itself can be

assigned a new name. This new Name will be shown in the VFD as well as

on the OSD.

To rename the A/V Preset label, scroll to “Name” and press [E] to go the rst

character. Then, press [R/T] to pick and select through the alphanumeric

selections. Press [W/E] to move to the next character or back to the

previous character and at the same time save the changes done on the

current character.

NOTE

The selected A/V Preset remains in force until you select a dierent A/V

Preset.

OPERATION

USING THE M17  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 AV Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 AV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info