Bedienungsanleitung NAD M17 V2i (Seite 15 von 32) (Englisch)

745036

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV

to send audio data “upstream” to M17.

This option has three choices: O, Auto or Source Setup.

Auto: When set to Auto, the M17 will automatically attempt an ARC

audio connection to the TV whenever the TV announces over CEC

that it has become the active source. If an ARC connection can be

established, the M17 will output the ARC audio signal no matter

what source is selected on the M17 and will show “HDMI ARC” on

the front panel display. The Auto option tends to work best when

all your devices support CEC and the Source Switch option is set to

“On”.

Source Setup: When set to Source Setup, you can select “ARC” for

the digital audio input in the source setup screen. When you select

a source on the M17 which is set for ARC, the M17 will attempt to

initiate an ARC connection with the TV. When using this option,

you would probably also want to make sure Source Switch is o

otherwise other CEC devices may keep changing the M17 source

when you want it to remain on the ARC source.

IMPORTANT NOTES

• “Audio System” must be set to “On” for “ARC Mode” to be congurable.

Otherwise, “ARC Mode“ will remain “O” .

• “CEC/LAN/BluOS in Standby” must be set to “On” for audio and video

to continuously stream from a CEC-enabled HDMI source to a CEC-

enabled TV (with both devices connected via M17).

SOURCE SETUP

The Source Setup menu makes it possible to set, allocate or change the

Sources settings.

The M17 Sources are all congurable. Each Source can be congured with

respect to the following settings.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

Yes/No: Select “Yes” to enable the particular Source or “No” to disable

the Source.

NAME

A new Name maybe assigned to a Source label. For example, if your BD

player is attached to “Source 1”, it is possible to rename “Source 1”to“BD

Player”.

In order to rename the Source label, scroll to the “Name” parameter. Press

[S] to go to the rst character. Then, press [D/F] to pick through the

alphanumeric selections.

Press [S] to move to the next character and at the same time save the

changes done on the current character. The name can be as long as twelve

characters.

The new Name will be shown in the front panel display as well as on the

OSD.

ANALOG AUDIO

All available analog Sources can be specically assigned to any of the main

Sources.

Active analog Source: Use [D/F] to select and assign an active

Source input to a particular main Source.

O: No incoming analog audio signal is selected by the particular

Source.

NOTE

An incoming digital signal present at the assigned digital input will

always take precedence over the assigned analog audio input if both

are present. To maintain the analog audio input for the particular

Source, select “O” at the “Digital Audio” setting of the same “Source”

menu.

ANALOG GAIN

Gain adjustment allows all sources to play back at the same volume level so

you don’t need to adjust the volume every time a new source is selected. It

is generally preferable to reduce the level of the loudest source rather than

making louder the softer sources.

Scroll to “Analog Gain”, press [S] and then [D/F] to step through the

desired level from -12dB to 12dB.

DIGITAL AUDIO

To take advantage of the M17’s high performance surround and digital

audio circuitry, it is advisable that its Digital Audio inputs are selected. There

are various types of Digital Audio input for the M17. These are HDMI, BluOS,

Optical and Coaxial digital inputs. Select “O” if it is intended not to assign

any digital audio input to a particular Source.

The following are the sets of assignable Digital Audio input.

HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5

Optical $ Optical 1, Optical 2

Coaxial $ Coaxial 1, Coaxial 2

BluOS

NOTE

An incoming digital signal present at the assigned digital input will

always take precedence over the assigned analog audio input if both

are present. To maintain the analog audio input for the particular

Source, select “O” at the “Digital Audio” setting of the same “Source”

menu.

OPERATION

USING THE M17  SETUP MENU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 V2i Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 V2i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info