Bedienungsanleitung NAD M17 V2i (Seite 18 von 32) (Englisch)

745036

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

SPEAKER DISTANCE

Your system’s speaker distance settings are a subtle but important

renement of your setup. Informing the M17 of the loudspeaker-to- listener

dimensions of each speaker automatically imposes the correct delays,

optimizing imaging, intelligibility and surround-sound ambience. Enter

your dimensions with precision within about 1 foot (0.3m).

SETTING SPEAKER DISTANCE

While at “Speaker Distance” menu, use the [D/F] keys to individually set

the distance measured from your principal listening position to the front

surface of the corresponding loudspeaker. Distance can be set up to 30

feet or 9.1 meters. Distance can be displayed as feet or meters selectable at

the “Unit of Measure” item.

If Dirac Live calibration is completed and selected, the Dirac Speakers

Distance settings will be shown.

DIRAC LIVE

The proprietary Dirac Live is integrated with your M17. Dirac Live® is a

patented room correction technology that not only corrects the frequency

response, but also the impulse response of a room’s loudspeakers. Dirac

Live provides true impulse response correction over a large listening area,

improving the depth, positioning and distinction of individual voices and

instruments. Using multiple measurement and mixed phase correction,

Dirac Live helps create a natural, realistic and transparent sound with

tighter bass and reduced room modes, in a way previously not possible.

Initiate Dirac Live by following below Setup Requirements.

M17

• Update your M17 to the latest rmware.

• Speaker Conguration must match actual speaker setup – turn o

speakers that are not available.

• Both your computer and M17 must be connected to the same network.

MICROPHONE

• The supplied measurement microphone can be connected to either

the MIC or USB input of your computer or the USB input of the M17.

• If the measurement microphone will be connected to the USB input of

your computer or the M17, ensure that the measurement microphone,

phone jack adapter and USB Mic adapter are all connected together.

The USB Mic adapter is not necessary if the measurement microphone

will be connected to the MIC input of your computer,

• Minimize external noise such as talking, opening/closing of doors or

windows and playback of sound during the measurement.

• Use a microphone stand to rmly place the microphone in the

indicated measurement positions.

COMPUTER WINDOWS, macOS

• Both your computer and M17 must be connected to the same network.

• Any active rewalls should allow HTTP (normal WWW access).

• Turn o any computer programs that may make any noise.

• Download the Dirac Live Calibration Tool™ installer.

Run the Dirac Live Calibration Tool™. Follow on-screen instructions. Refer

also to the HELP window for more detailed instructions.

View and follow simulated Dirac Live Calibration at:

nadelectronics.com/dirac-live

For further information about Dirac Live Room Correction technology, visit:

www.dirac.com/live-home-professional-audio-info

ADJUSTING THE VOLUME

In addition to the Volume knob, use the HTRM 2’s VOL [5/6] to adjust the

“master volume” of the M17 raising or lowering the channels altogether. A

momentary keypress will change the master volume by 0.5dB increments.

If you hold down VOL [5/6], the master-volume change will “run-on” until

the key is released.

Since recordings vary considerably in overall average level, there is no

imperative to listen at any particular master-volume setting. A setting

of -20dB may sound “as loud” from one CD or DVD as -10dB does from

another.

The M17 will power-up from Standby mode at whatever master volume

setting was last used; however, if the prior setting was greater than -20dB,

the M17 will power up at -20dB. This prevents inadvertently beginning a

session at excessive volume.

MUTING THE SOUND

Use the HTRM 2’s [MUTE] key to silence all channels completely. Muting is

always available regardless of the source or listening mode selections.

NOTES

• Changing input or listening-mode selections does not release muting.

• Adjusting the volume level via the HTRM 2 or the front panel volume

knob will automatically release the mute function.

OPERATION

USING THE M17  SETUP MENU

HTRM 2

OFF

SOURCE

SSEETTUUPP DDEELLAAYY // PPIICCTTUURREE TTEESSTT // ZZOOOOMM

EEQQ TTOONNEE LL..NNIITTEE

DDIIMMMMEERR

CHANNEL VOLUME

MMUUTTEE

PPRROOGGRRAAMM CCLLEEAARR RREEPPEEAATT

DAC

DEVICE SELECTOR

SSLLEEEEPP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 V2i Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 V2i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info