Bedienungsanleitung NAD T 747 (Seite 6 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

IDENTIFICATION OF CONTROLS

FRONT PANEL

1 POWER BUTTON: Press this button to switch ON the T 747. The Standby

LED indicator will turn from amber to blue and illuminate the VFD. Pressing

the power button again turns the unit back to standby mode.

2 STANDBY LED: This indicator will light up amber when the T 747 is in

standby state. When either the T 747 main zone or Zone 2 is at the ON

state, this indicator will illuminate blue.

3 NAVIGATION and ENTER buttons: These buttons are used to

navigate the T 747 OSD (On-Screen Display), AM/FM/XM/DAB tuner

functions as well as applicable controls of an iPod player docked into

a linked NAD IPD (NAD IPD Dock for iPod). The middle round button is

designated as “ENTER” button; this is normally pressed to complete a

selection, procedure, sequence or other applicable functions.

4 MENU: When listening to DAB (230V version only) or XM (120V version

only) radio, press this button to enable their corresponding digital radio

menu in conjunction with the applicable [ ] and [ENTER] buttons.

5 LISTENING MODE: Toggle to select through the various Listening

mode options. Depending on the format of the currently selected input

(digital or analog, stereo or multichannel), various listening modes are

available. Refer also to the item about LISTENING MODE under the

USING THE T 747 – MAIN MENU segment of the OPERATION section.

6 VACUUM FLUORESCENT DISPLAY (VFD): Displays visual information

about the current settings like the active Source, volume level, listening

mode, audio format, applicable RDS/XM/DAB as well as iPod-related

display information and other related indicators.

7 REMOTE SENSOR: Point the AVR 3 remote control at the remote sensor

and press the buttons. Do not expose the remote sensor of the T 747 to a

strong light source such as direct sunlight or illumination. If you do so, you

may not be able to operate the T 747 with the remote control.

Distance: About 23ft (7m) from the front of the remote sensor.

Angle: About 30° in each direction of the front of the remote sensor.

8 SOURCE [ ] : Press these buttons to toggle through the input

selections – Source 1, Source 2, Source 3, iPod, Source 5, Multi, Front,

MP and Tuner (AM/FM/DAB/XM as applicable). More Sources could

be directly recalled through these buttons upon enabling them at the

Setup Menu. Refer also to the item about SOURCE SETUP under the

USING THE T 747 – SETUP MENU segment of the OPERATION section.

9 VOLUME: Use this control to adjust the volume level of the speakers.

Turn clockwise to increase the volume setting; counter clockwise to

lower it. The VFD shows the setting displayed as increments between

-81 dB and +18 dB. The default volume level is -10dB.

3 4 5 6 7 9

1 2

10 12

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info