Bedienungsanleitung NAD T 747 (Seite 8 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

1 DIGITAL AUDIO (COAXIAL 1-2, OPTICAL 1-2): Connect to the

corresponding optical or coaxial S/PDIF-format digital output of

sources such as CD or BD/DVD players, HDTV or satellite tuners and

other components. Coaxial and Optical digital input association is

congurable via the Source Setup item of the Setup Menu OSD.

DIGITAL AUDIO OUT (OPTICAL, COAXIAL): Connect the optical or

coaxial digital OUT port to the corresponding S/PDIF digital input of a

compatible device such as CD recorders, receivers, computer soundcard

or other digital processors.

2 MONITOR OUT (S-VIDEO, VIDEO): Connect to video input of the

monitor/television using quality dual-RCA and/or S-Video cables

designed for video signals. In general, the S-Video connection

is superior and should be used if your TV/monitor provides the

corresponding input.

3 AUDIO 1 IN/OUT, VIDEO 1 IN/OUT, S-VIDEO IN/OUT: Connect

AUDIO 1 IN/VIDEO 1 IN/S-VIDEO 1 IN to the analog audio/video output

port of a recording component such as a video cassette recorder, DVD

recorder or to an outboard audio/video processor. Connect AUDIO

1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT to the recording component’s

corresponding analog audio/video input port.

The signal present at AUDIO 1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT port

is dependent upon the current active SOURCE. There will be no output

at AUDIO 1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT when Source 1 is the

selected source input. This prevents feedback through the recording

component thereby preventing possible damage to your speakers.

4 AUDIO 2-4/VIDEO 2-4, S-VIDEO 2-4: These comprise the T 747’s

other principal inputs. Connect these S-Video, composite video, and

analog stereo audio input ports to the corresponding output ports of

source components such as DVD players and HDTV/satellite tuners.

Refer also to “AUDIO 1 IN/OUT, VIDEO 1 IN/OUT, S-VIDEO 1 IN/OUT”

discussion above.

5 ZONE 2: Sends zone selected video output source to the

corresponding video input of another zone. Use high quality patch

cables to reduce noise pickup over long distance runs. Refer also to

the item about ZONE 2 CONTROLS under the USING THE T 747 - MAIN

MENU segment of the OPERATION section.

6 HDMI (HDMI 1-4, HDMI MONITOR OUT): Connect HDMI inputs to

the HDMI OUT connectors of source components such as DVD player,

BD player or HDTV satellite/cable box. Connect the HDMI Monitor OUT

to a HDTV or projector with HDMI input.

WARNING

Before connecting and disconnecting any HDMI cables, both the T 747

and the ancillary source must be powered OFF and unplugged from the

AC outlet. Failure to observe this practice may cause permanent damage

to all equipment connected via HDMI sockets.

7 COMPONENT VIDEO INPUT 1-3, COMPONENT VIDEO OUT:

Connect the Component Video Input 1-3 inputs to Component Video

outputs from compatible source components, typically a DVD player,

BD Player and terrestrial or satellite HDTV tuner. Connect Component

Video OUT to the Component Video input of a compatible video

monitor/TV. Be sure to observe consistency in connecting the Y/

Pb/Pr jacks to the corresponding sources/inputs. The routing of the

component video inputs is fully congurable via the Setup Menu.

The T 747’s component video inputs and outputs are fully wideband

and compatible with allowable HDTV formats.

IDENTIFICATION OF CONTROLS

REAR PANEL

ATTENTION!

Please make sure that the T 747 is powered o or unplugged before making any connections. It is also advisable to power down or unplug all associated

components while making or breaking any signal or AC power connections.

1 2 3 4 6 7 8 9 10

16 18 2017 19

14131211 15 2221

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info