Bedienungsanleitung NAD T 747 (Seite 12 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

10 VOL [ ] : Press [ ] button to increase or decrease the loudness level. Release the button

when the desired level is reached. The VFD on the front panel will indicate the level set. For NAD

Receivers, the VFD will also show “Volume Up” or “Volume Down” or “Volume: _ _ dB” (_ _ indicates

the numerical dB level) while pressing AVR 3’s .

11 [ ] : Select an item in a menu.

12 SLEEP: Switch o the NAD Receiver or Tuner after a preset number of minutes.

SLEEP MODE

The Sleep Mode timer will switch the T 747 to Standby mode automatically after a preset number of

minutes. Pressing the AVR 3’s [SLEEP] button once will display the setting of the sleep time increment.

Pressing the AVR 3’s [SLEEP] button a second time within a 3-second period will change the sleep time

increment in 15-minute intervals, after which time the T 747 will automatically switch into Standby mode.

To adjust the sleep delay, press the AVR 3’s [SLEEP] button twice; rst to display the sleep time

increment, and a second time to change the sleep time increment. The sleep time increment

will continuously be displayed on the T 747’s front panel Vacuum Fluorescent Display (VFD). Each

consecutive press increases the sleep time in 15-minute increments from 15 to 90 minutes. To cancel

the sleep mode, continue pressing the AVR 3’s [SLEEP] button until “Sleep O” is displayed on the

VFD. Switching the T 747 to standby from either the AVR 3’s OFF or the T 747’s POWER button will also

cancel the sleep mode.

DVD/BD/CD PLAYER CONTROL (for use with NAD CD Player, Blu-ray Disc Player or DVD Player):

Set the DEVICE SELECTOR to “BD” in order to gain access to these buttons. Some of the control buttons

below are applicable only to specic NAD CD Player, Blu-ray Disc Player or DVD Player models; check the

owner’s manual of your NAD model for control button compatibility. You can also load the applicable

NAD code library to this device so that it can be made compatible with your other NAD equipment.

Refer to the section below about “LIBRARY” on how to load a NAD code library.

HOME: Display or exit HOME menu.

PICTURE: Display or exit the Picture Mode menu.

TITLE/POP-UP: Display DVD title menu or BD-ROM pop menu, if available.

MENU: Access menu on a DVD disc, if available.

SCAN [ ]: Fast reverse/forward search.

[ ] : Open or close disc tray.

[ ] : Stop playback.

[ ] : Pause playback temporarily.

[ ] : Go to next track, le or chapter.

[ ] : Go to beginning of current/previous track, le or chapter.

[ ]: Start playback.

ENTER: Select desired track, folder or WMA/MP3 le.

DISP: Show playback time and other display information.

RAND: Play tracks/les in random order.

RPT: Repeat track, le or whole disc.

PROG: Enter or exit program mode.

CLEAR: Delete programmed track/le.

RES: Set output resolution of HDMI and Component Video output.

SETUP: Access or remove setup menu.

A,B,C,D: Navigate or select BD-ROM menu, if applicable; Page up/down PHOTO and MUSIC menu

list.

IDENTIFICATION OF CONTROLS

REMOTE CONTROL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info