Bedienungsanleitung NAD T 747 (Seite 16 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

NEO:6

Two-channel recordings, whether stereo or surround-encoded, are

reproduced with Neo:6 surround with output to front left/right, center and

discrete left/right surround channels plus subwoofer (assuming these are

present in the current “Speaker Conguration”). The T 747 provides two DTS

NEO:6 variations - NEO:6 Cinema and NEO:6 Music. See also section about

“ADJUSTING LISTENING MODES” below.

EARS

Two-channel recordings, whether stereo or surround-encoded, are

reproduced with proprietary NAD surround processing with output signals

to the front left/right, center and discrete left/right surround channels,

plus subwoofer (assuming these are present in the current “Speaker

Conguration”). EARS does not employ the surround back speakers (if any).

EARS extracts the natural ambience present in nearly all well-produced

stereo recordings. It does not synthesize any ambience or other sonic

elements and thus remain truer to the sound of the original musical

performance than most other music-surround options.

Select EARS for listening to stereo music recordings and broadcasts.

EARS produces a subtle but highly natural and believable ambience from

nearly all “natural-acoustic” stereo recordings. Typically, these include

classical, jazz, and folk genres as well as numerous examples from others.

Its virtues include realistic, stable “front-stage” sonic imaging and spacious

but unexaggerated ambient “virtual acoustics” that remain faithful to the

original recording.

ENHANCED STEREO

All recordings are reproduced in stereo via the maximum speaker

complement congured in the current “Speaker Conguration”. Enhanced

stereo can be useful for maximum volume from all channels or for multi-

speaker background music (cocktail party) listening. For this mode, Front,

Center, Surround and Back speakers can be turned ON/OFF as desired.

7 CH STEREO 7 CHANNEL STEREO

Two-channel recordings are reproduced with output signals to the front

left/right, center, discrete left/right surround and back surround left/right

channels, plus subwoofer (assuming these are present in the current

“Speaker Conguration”). The Back Surround (left/right) output level is -3 dB

lower than the other channels.

ANALOG BYPASS

All analog signals remain in the analog domain without analog-to-digital

conversions. At Analog Bypass, the DSP circuitry is bypassed but full tone

control functions remain. “Bass management” or “Speaker Setup” are also

not in eect as these are DSP functions.

ADJUSTING LISTENING MODES

Several of the T 747’s listening modes have one or more selectable variations

and adjustable parameters that you can modify to suit your personal

preferences. At Listening Mode menu, use a combination of the [ ] and

[ ] keys to navigate and eect desired settings.

NOTE

Listening Mode parameter changes are maintained when you change

listening modes. You may also save a modied Listening Mode for easy

recall by saving it to a Preset (See “A/V PRESETS” below under Setup

Menu discussions).

PRO LOGIC IIx

PLIIx MOVIE is optimized for lm soundtracks.

PLIIx MUSIC for music recordings.

Center Width (0 to 7): Modies the “hard-centeredness” of the center

image, by gradually mixing mono center content to the Front left/right

speakers as well. A setting of 0 retains the center-channel-only default

while a setting of 7 yields a fully phantom center channel.

Dimension (-3 to +3): Adjusts front-rear emphasis of the surround

eect independently from the relative channel levels.

Panorama (On/O): Adds a “wrap around” eect by extending some

stereo content into the surround channels.

NOTE

Pro Logic IIx mode will decode as Pro Logic II mode when the “Back”

surround speakers are set to “O” from “Speaker Conguration” menu.

Refer also to the item about “SPEAKER CONFIGURATION” under the

“SPEAKER SETUP” segment of “OPERATION – USING THE T 747 – SETUP

MENU” section.

NEO:6

NEO:6 Cinema is optimized for lm soundtracks.

NEO:6 Music for music recordings.

Center Gain (0 to 0.5): Adjust for better center image in relation to the

surround sound channels.

DSP OPTIONS

DSP Options has the feature “Lip Sync Delay” whose function is to match

any delay that may occur in the picture relative to the audio.

By varying “Lip Sync Delay” from 0ms to 120ms, one can delay the audio

output in order to synchronize it with the video image.

Another DSP option is the “HDMI Audio to TV”. This option is applicable

only when using an HDMI source and a video output display that is HDMI-

capable. “HDMI Audio to TV” setting can be set to either “On” or “O”.

On: When set to “On”, audio will be available via both the HDMI-capable

TV’s own speakers and the T 747’s speakers.

O: When set to “O”, audio will only be available via the T 747’s

speakers. There will be no audio at the HDMI-capable TV’s own speakers.

OPERATION

USING THE T 747  MAIN MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info