Bedienungsanleitung NAD T 747 (Seite 18 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

SETUP MENU

The Setup Menu allows one to customize the operation of the T 747 to the

ancillary equipment used in one’s specic AV system. Unless your system

exactly matches the factory defaults, you will need to use the Setup Menu

to congure the settings of your T 747.

At Setup Menu, the following are congurable – A/V Presets, Source Setup,

Speaker Setup, Amplier Setup, Trigger Setup, Listening Mode Setup, Front

Panel Display Setup and Video Setup.

To navigate through these Setup Menu options and their sub-menu

selections, please refer to above section about “DISPLAY THE OSD” and

“NAVIGATING THE OSD AND MAKING CHANGES”.

A/V PRESETS

The T 747’s simple but powerfully exible system of “Presets” allows you

to customize virtually every aspect of your audio-video playback. The

parameters “Listening Mode”, “DSP Options”, “Tone Controls”, “Speaker Setup”

and “Front Panel Display Setup” settings are stored together as a Single

Preset.

You might create one Preset optimized for pop music and another for

classical. One more Preset can be set up to recall each family member’s

favorite setting or one for fully cinematic home-theater playback and

yet another one for late-night movies, with each Preset ne-tuned to a

particular scenario or preference.

CREATING PRESETS

Creating a Preset consists simply of storing a complete set of the

parameters set forth in the “Listening Mode”, “DSP Options”, “Tone Controls”,

“Speaker Setup” and “Front Panel Display Setup” congurable through

“Setup Menu”.

Go to “A/V Presets” to save a collection of said parameter settings to a Preset.

Select a Preset number and you can then selectively include in this particular

Preset number any of the above-mentioned parameter settings by choosing

“Yes”. If you decide not to include in the particular Preset a certain parameter

setting, select “No”.

Now in order to save the settings chosen for the particular Preset number,

scroll down to “Save Current Setup to Preset” and press the [ ] key. If you

chose to load instead the default settings, scroll down to “Load Defaults to

Preset” and press the [ ] key to restore the default settings.

In addition to the parameter settings, the Preset label itself can be assigned a

new name. This new Name will be shown in the VFD as well as on the OSD.

To rename the Preset label, scroll to “Name” and press [ ] to go the

character. Then, press [ ] to pick and select through the alphanumeric

selections. Press [ ] to move to the next character or back to the

previous character and at the same time save the changes done on the

current character.

OPERATION

USING THE T 747  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info