Bedienungsanleitung NAD T 747 (Seite 36 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

PRESET TUNE

Use this option to select a DAB preset station.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [ ] to select “Preset tune”. Press [ENTER].

2 Press [ ] to step up or down between presets. Note that Presets

must have been previously stored.

3 Press [ENTER] to select desired preset number.

SETTING DAB PRESETS

The T 747 can store as many as 99 DAB stations of your favorite DAB

broadcast for immediate recall.

1 To store a DAB preset, rst tune the DAB broadcast, and then press

the AVR 3’s panel [MEMORY] button (DEVICE SELECTOR must be set

to “TUN”). The VFD will show “Preset Memory” and the next available

vacant Preset number (the number is blinking).

2 Press [MEMORY] button again to store the desired DAB broadcast on

the Preset number shown or use the [ ] front panel keys to select

another available Preset number.

3 Then, press [MEMORY] key button again. Your desired DAB broadcast is

now stored in the assigned preset.

STATION ORDER

Use “Station order” to sort the sequence of the listed stations. There are four

orders – Alphanumeric, Active, Ensemble and Favourite.

1 While listening to a DAB broadcast, press the [MENU] button and then

[ ] to select “Station Order”. Press [ENTER].

2 Toggle [ ] to select through “Alphanumeric”, “Active”, “Ensemble”

and “Favourite”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio stations are

arranged in the order of their ensemble names.

NOTE

Ensemble is also interchangeably termed as “multiplex” by other

broadcast providers.

FAVOURITE

The T 747 memorizes the top ten stations you listen as you tune in stations.

They will be listed at the top of the channel list. A heart-shaped icon [ ♥ ]

will be illuminated beside a favourite station.

DYNAMIC RANGE

The level of compression of stations can be set to eliminate the dierences

in dynamic range or sound level between radio stations. Popular music

would normally be more compressed than classical music, resulting in

possible dierent audio levels when changing from one station to the

other. Setting the Dynamic Range to “D-Range 0” means no compression,

“D-Range 1/2” indicates medium compression and “D-Range 1” shows

maximum compression. No compression is recommended, especially for

classical music.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [ ] to select “Dynamic range”. Press [ENTER].

2 Toggle [ ] to select through “D-Range 0”, “D-Range ½” and

“D-Range 1”. The upper line display shows the current dynamic range

setting while the lower line display will show the choices for the

dynamic range values.

3 Press [ENTER] to select desired dynamic range level.

MANUAL SCAN

This option allows you to manually tune to a desired channel and include it

in the service list (if not yet available at the time). You can also use MANUAL

SCAN to assist you in positioning the DAB antenna for best reception of the

desired channel.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [ ] to select “Manual Scan”. Press [ENTER]. The current

channel and frequency are shown in the lower line of the VFD. The

number of “o” displays at the upper line of the VFD indicates the signal

strength level of the current channel.

2 To select other channels, toggle [ ] to step through the channel

list. Release [ ] when you have arrived at your desired channel.

Channel and frequency are shown in the lower line of the VFD. The

number of “o” display at the upper line of the VFD indicates the signal

strength level of the current channel. To improve the reception of the

selected channel, adjust or reposition the DAB antenna until the best

reception is indicated.

3 Press [ENTER] to tune the selected channel.

NOTE

The number of ensembles and stations that could be scanned will vary

depending on your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [ ] to select “Prune List”.

2 Press [ENTER]. Use [ ] and then press [ENTER] to select between

“Cancel” or “OK? [SELECT]”. Any inactive stations (normally preceded by

a “?” mark) are automatically deleted when “OK? [SELECT]” is selected.

Otherwise, select “Cancel”.

DAB RESET

The “DAB Reset” option enables the re-initializing of the NAD DAB Adaptor

DB1 by going to Full Scan mode.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [ ] to select “DAB Reset”. Press [ENTER].

2 The T 747 will initiate “DAB Initialize” and immediately go on to “Full

Scan” mode thereby enabling the T 747 to re-scan again the full range

of available DAB broadcasts.

IMPORTANT NOTICE

When “DAB Reset” option is selected, all stored DAB presets will be

erased.

OPERATION

LISTENING TO DAB RADIO

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD T 747 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info