Bedienungsanleitung NAD T 747 (Seite 34 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

The T 747 is “XM Ready” which means that with the addition of separately sold

XM Mini-Tuner CPC-9000 and XM Mini-Tuner Home Dock, it has everything you

need to listen to live XM. Everything else is built right in. Just subscribe to the

XM service and your T 747 will be ready to receive XM content.

NOTES

• CheckwithyourNADaudiospecialistforotherversionsofXMMini-

Tuner compatible with T 747.

• WhenusingtheAVR3remotecontroltocarryoutXMcommands,

ensure that the DEVICE SELECTOR is set to “TUN”.

• AtXMmodeandwithDEVICESELECTORsetto“TUN”,AVR3’s[TUNER

MODE] button has the same function as that of front panel’s [MENU]

button.

IMPORTANT NOTICE

Unless otherwise specically stated, navigating or accessing XM

functions can be undertaken by using either the AVR 3 remote control

or the front panel buttons. If the control button or icon button being

referred to is available on the AVR 3 remote control and front panel,

then the reference to said button is applicable to both the AVR 3 remote

control and front panel.

CONNECTING THE XM ANTENNA

1 Plug the end of the XM antenna into the corresponding XM antenna

port on the rear panel of the T 747.

2 Press and hold front panel’s [MENU] button to check the current XM

channel’s signal strength as shown in the VFD and OSD. Press [MENU]

again to exit signal strength check.

Refer also to your XM radio’s guide on how to install the XM antenna for

optimum signal reception.

TUNING OF XM CHANNELS

There are three ways to tune to the XM channel you wish to listen.

1 ALL CH SEARCH (ALL CHANNEL SEARCH): Toggle front panel’s

[MENU] button to select “ALL CH SEARCH”. Use [ ] buttons to step

up or down each available XM channel. Press and hold [ ] for faster

scanning of XM channels.

2 CAT (CATEGORY) SEARCH: The XM channels are grouped into

categories for easier selection of desired genre.

a Toggle front panel’s [MENU] button to select “CAT SEARCH”. A

corresponding category, i.e., Country, Rock, Jazz & Blues, etc., is

displayed in the VFD.

b Use [ ] buttons to step up or down the available categories.

c Press [ ] buttons to select through the available XM channels

within the selected category. .

d Repeat “b” above to choose another category.

3 PRESET SEARCH: Toggle front panel’s [MENU] button to select “PRESET

SEARCH”. At this menu option, a stored preset can be directly recalled

by entering the preset number using the AVR 3’s numeric buttons.

DIRECT CHANNEL CALL

While at either CAT SEARCH or ALL CH SEARCH mode, a desired XM

channel can be directly tuned in by using the AVR 3’s numeric buttons. To

key-in XM channels that are less the 3 digits, press “0” in place of the digit or

press [ENTER] after entering the XM channel number. For example, to enter

XM channel 8, press “0”, “0” and “8” or press “8” then [ENTER].

VIEW XM INFORMATION

Toggle AVR 3’s [INFO] button to display the XM information of the selected

channel such as the XM channel category, XM station name, artist name,

song title or any other text as supplied for the channel.

SETTING XM PRESETS APPLICABLE ONLY AT PRESET SEARCH MODE

1 Select the XM channel you would like to save. Then, toggle front panel’s

[MENU] button to select “PRESET SEARCH” mode.

2 While at the desired XM channel, press [MEMORY] button. The VFD will show

the next available Preset number. If there are no more vacant Preset number,

you can overwrite an existing Preset number by pressing the [ ] buttons

to select the Preset number you want to overwrite.

3 Press the [MEMORY] button again to store the desired XM channel on

the Preset number shown (or use the [ ] buttons to select another

available Preset number; then, press [MEMORY] button again).

4 The lower line of the VFD will show “Preset “_ _” Saved” (“_ _”

corresponds to the preset number the XM channel was stored). Your

desired XM channel is now stored in the assigned preset.

You can store up to 40 XM channels. For immediate recall of stored XM

presets, press AVR 3’s [ ] keys to step up or down the stored XM

channel presets (make sure that you are at XM band).

DELETE XM PRESET

To delete a particular XM Preset number, press [DELETE] while at “PRESET

SEARCH” mode and at the Preset number you want to delete – the lower

line of the VFD will show “_ _ DELETED” (“_ _” stands for the Preset number

deleted).

To delete all stored XM presets, press and hold [DELETE] until “DELETED” is

shown in the lower line of the VFD.

OPERATION

LISTENING TO XM RADIO

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info