Bedienungsanleitung NAD T 747 (Seite 33 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

AUTOMATIC PRESET

Preset stations may also be programmed automatically for the entire FM (or

AM) band.

1 Select FM or AM band by repeatedly pressing [AM/FM/DB] until FM or

AM mode appears.

2 Press and hold the AVR 3’s [MEMORY] button until the station frequency

indication begins to increase.

3 Release the button and note that the tuner will search the entire FM

(or AM) band, and stop briey at each station that has acceptable

signal strength. The T 747 will automatically assign a preset number to

each station, and then search for the next station. Up to 30 of the best

received FM stations (or 30 AM stations) will be automatically stored.

DELETING A STORED PRESET

You can empty a preset by deleting the stored information.

1 Select the preset number to be deleted.

2 While at the selected preset number, press the AVR 3’s [DELETE] button.

3 The preset will then be deleted and “DELETED” scrolls on the display.

4 To clear all the Presets at the same time, repeat step 2 again but this

time do not release the [DELETE] button. Press and hold [DELETE]

button until the current Preset number shown in the VFD is

extinguished (P--). All Presets are now deleted.

CHOOSING THE TUNER MODE

The AVR 3’s [TUNER MODE] key is a dual-purpose control. Toggle [TUNER

MODE] to switch between FM Stereo mode and FM Mono. In the normal

position, “FM STEREO ON”, only the stations with a strong signal can be

listened to, and the noise between stations is muted.

Pressing the [TUNER MODE] button again (“FM STEREO OFF”) allows distant

and potentially noisy stations to be received. Noise is reduced if the FM

station signal level is less than the FM Stereo threshold (since mono FM is

inherently less noise-prone) though at the sacrice of the stereo eect.

ABOUT USER NAMES

You can assign an eight character “User Name” to each radio preset, which

will show in the front-panel readout whenever that preset is recalled.

ENTERING USER NAMES

To name a radio preset “NEWS”, follow the procedure as below.

1 Recall the desired radio preset.

2 Then, press and hold [INFO] of the AVR 3 until the display shows a

ashing cursor point.

3 Use the [ ] buttons to select the rst character of the name (“N”

from the alphabetical list).

4 Press [ ] button to select the character and correspondingly move

forward to the next position. (Press [ ] to go back to the previous

character). Repeat this process for each character in sequence.

5 Press the [MEMORY] key to store the User Name and exit the text-entry

mode.

ABOUT RDS

The Radio Data System (RDS) permits sending small amounts of digital

information using conventional FM radio broadcasts. The T 747 supports

two RDS modes, station-name (PS mode) and radio-text (RT mode). Not

every FM station incorporates RDS in its broadcast signal. In most areas you

will nd from one to several RDS-enabled stations, but it is by no means

impossible that your favorite stations will not be broadcasting RDS data.

VIEW RDS TEXT

When an RDS-enabled FM broadcast is tuned, the readout’s character section

will show its station-name (PS) text: “ROCK101”, for example.

Press the AVR 3’s INFO key to toggle the readout between this and the station’s

radio-text (RT) readout, if any, which might scroll song- or artist-name, or any

other text of the station’s choosing.

OPERATION

LISTENING TO AM/FM RADIO

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info