Bedienungsanleitung NAD T 747 (Seite 31 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Press [ ] to save the new resolution or [ ] to cancel the change in

resolution.

IMPORTANT NOTES

• Whenusingcomponentvideooutput,astandarddenitionvideocan

be upscaled only up to 1080i.

• Ifyouinadvertentlyselectedaresolutionsetting(like1080p)thatyour

TV/Monitor does not support, the video display will go blank. To restore

video display, press [ ] or turn OFF/ON the T 747.

Frame Rate: Frame rate refers to the number of frames or images that

are projected or displayed per second in motion pictures, television or

computer video display.

Depending upon your area and video resolution capability of your

TV/Monitor, the following “Frame Rate” options are available

50Hz: setting normally for Europe and most of Asia

60Hz: setting normally for North America

24Hz: select to deliver lm-like motion characteristics; available or

selectable only if your TV/Monitor supports 1080p.

When the “Resolution to Display” is set to “Auto”, “Frame Rate” as an

option will not be available.

IMPORTANT NOTES

• Thesourcecomponent,theT747andtheTV/Monitormusthavethe

same frame rate settings. If they do not have the same settings, video

output maybe distorted.

• SelectableFrameRatefor120VversionmodelsofT747islimitedonly

to 60Hz and 24Hz. If your TV/Monitor does not support 1080p, 24Hz will

not appear as an option.

• For230VversionmodelsofT747,50Hz,60Hzand24Hzarethe

selectable Frame Rate options. If your TV/Monitor does not support

1080p, 24Hz will not appear as an option.

PICTURE SETUP

Picture setup can be defaulted to “Normal” or “Custom”. These settings can

be accessed at “Video Modes” menu item of the “Picture Setup” OSD.

Select “Normal” to retain the default picture setup settings. If you would

like to further improve the picture settings or adjust the parameters

according to your preference, set “Video Modes” to “Custom”. The following

parameters can be adjusted at “Custom” setting

Brightness: Adjust overall brightness of the video display.

Contrast: Adjust bright areas (white level) of the video display.

Color: In combination with brightness and contrast levels, adjust the

color level to suit your preference. Set the level so that the colors look

strong but still natural, not overdone.

MPEG Noise Reduction: This setting addresses video distortion like

video noise and blocking artifacts. Set MPEG Noise Reduction level to

High, Medium and Low.

Cross Color Suppressor: Remove cross color artifacts that can occur

when high-frequency luminance (brightness) signals are misinterpreted

as chroma (color) signals. This can cause unwanted ickering, ashing

colors or rainbow patterns. Select “On” to turn ON this feature;

otherwise, select “O”.

Film Mode Detect: While normally set to “O”, turn “On” this setting

to compensate for authoring errors that may have occurred during the

process of converting lm programs to video.

OPERATION

USING THE T 747  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info