Bedienungsanleitung NAD T 775 (Seite 20 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

SOURCE SETUP (TABLE VIEW)

The Source Setup (Table View) reects the settings made in the Source

Setup (Normal View) menu. All the Source settings are summarized and

displayed in tabulated form in the Source Setup (Table View).

Navigating through the Source Setup (Table View) via a combination of

and then keys, one will have the benet of directly changing the

settings for ‘Audio, Video, Preset, Trigger and Source Name’ without going

back to the Source Setup (Normal View) menu.

iPod SETUP

The iPod Setup menu allows you to preset the following associated settings

when iPod is the selected source:

Enabled : Select ‘Yes’ to enable iPod as a Source or ‘No’ to disable it.

Auto Connect : Select ‘Yes’ to automatically enable and connect the

iPod player docked in the linked NAD iPod docking station when Source

5 (the default iPod source allocation in the T 775) is selected. Select ‘No’

if you do not want for the iPod connection automatically connected.

Menu Timeout : Set the time for the OSD to revert to the ‘Now

Playing’ display when the iPod menu has been left idle (no scrolling or

navigation being done) for the specied time out time. For the ‘Now

Playing’ OSD to be shown, there should be a song paused or being

played before going to the iPod menu. You can set the ‘Menu Timeout’

between the range 5s to 60s at 5s increments. If you do not want for

the menu to timeout, select ‘O.’

SPEAKER SETUP

After connecting all ancillary sources and other combinations, the Speaker

Setup menu will guide you on how to manage and setup your speakers in

order to achieve optimum sound acoustics in your listening environment.

The following are the Speaker Setup Menu sections.

AUDYSSEY AUTO CALIBRATION

It has been shown that many, if not most, surround sound systems are not

accurately setup and calibrated. To be done properly, calibration requires

special knowledge and instrumentation that the average person probably

doesn’t possess.

The Audyssey Auto Setup and Calibration featured in T 775 uses a

microphone, along with sophisticated digital electronics built into your

T 775, to automatically setup and calibrate the T 775 to the exact speakers

and speaker placement of your own unique Home Theatre.

The following measurements are performed:

• Detection: Speaker conguration is detected including number of

surround speakers and whether a subwoofer and center channel is

connected.

• Size: T 775 crossover is set based on each channel’s signal handling

capability and the subwoofer crossover is automatically set.

• Level: SPL of each speaker is matched within 1dB at the microphone

position.

• Distance: is accurately set to within 1 foot (30 centimeters) of the

microphone for each speaker position.

• Polarity: the setup program will detect and notify the user if any

speakers are connected improperly. Incorrect polarity can ruin the

illusion of realism oered by surround sound.

This is a one-time set up, unless speakers are moved or changed, in which

case the calibration should be performed again.

OPERATION

USING THE T 775  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info