Bedienungsanleitung NAD T 775 (Seite 38 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

LEARNING CODES FROM OTHER REMOTES

Begin by positioning the HTR 3 “nose-to-nose” with the source remote so the two devices’ infrared

windows are about 2 inches apart.

• Enter Learning Mode: On the HTR 3, simultaneously press-and-hold for 3 seconds both a Device

Selector key and the [RES] key (just below the DISP key) until the Learn LED at the center of the

HTR 3 turns steady green.

• Press the HTR 3’s function key you wish to teach a command; the Learn LED will turn amber.

• Press-and-hold the function key on the source remote: The HTR 3’s Learn LED will icker amber for

a second or two, then turn solid green. The command is learned.

• Press the HTR 3’s Device Selector key again to exit the learning mode.

If the Learn LED does not icker amber you may need to vary the distance between the remotes. If

the Learn LED turns red rather than green, that particular command of that source remote command

could not be learned.

Example: Learning “DVD Pause”

Position the HTR 3 and your DVD player’s remote as described above.

• On the HTR 3, simultaneously press-and-hold [DVD] and [RES]; the Learn LED turns steady green.

• Press the HTR 3’s Pause [ ] key; the Learn LED turns amber.

• Press-and-hold the corresponding Pause key of your DVD player’s remote control; the HTR 3’s Learn

LED ickers amber and then turns solid green. The command is learned.

• Press [DVD] again to exit the learning mode.

CANCEL OPERATION

You can cancel conguring a key, by pressing the active Device Selector key before the learn process is

complete; the Learn LED will turn red.

PUNCH THROUGH

The HTR 3’s “punch-through” function allows you to retain a function key from one Device Select “page”

to another, so that, for example, the AMP [SURR MODE] function might still control the T 775 when the

DVD Device Selector page is active.

NOTE

 TheHTR3’s[VOL]keysarepre-programmedas“punched-through”forallDeviceSelectpages:

[VOL]willoperatetheT775’smaster-volumeregardlessofthecurrentlyselecteddevice.The[SURR]

[CENTER,]and[SUB]ChannelVolumecontrolssimilarlyarepre-programmedaspunched-through.

To set a punch through, after entering the Learning Mode, and pressing the desired key to be punched

through, simply press the device key twice of the device to punch through to. The status LED will turn

green; press the Device Selector key again to exit Learning Mode.

Example: Punch-through AMP [SURR MODE] key to the DVD “page”

• On the HTR 3, simultaneously press-and-hold [DVD] and [RES]; the Learn LED turns steady green.

• Press [SURR MODE]; the Learn LED turns amber.

• Press [AMP] twice; the Learn LED turns green.

• Press [DVD] again to exit the learning mode.

COPY A COMMAND FROM ANOTHER KEY

You may copy a command from any HTR 3 key to any other. To copy a key function, after entering the

Learning Mode, and pressing the desired key to be copied to, simply press the device key from which

you wish to copy, having rst pressed its Device Selector key if it resides on another “page.” The status

LED will turn green; press the Device Selector key again to exit Learning Mode.

Example: Copy the Pause command from the CD page to the AMP [ ] button:

• On the HTR 3, simultaneously press-and-hold [AMP] and [RES]; the Learn LED turns steady green.

• Press Pause [ ] ; the Learn LED turns amber.

• Press [CD]; press Pause [ ] ; the Learn LED turns green.

• Press [AMP] again to exit the learning mode.

NOTE

 Thecopyandpunch-throughfunctionsaresimilar.However,ifyoucopyacommandandthen

subsequentlydelete,orover-writetheoriginal(source-key)command,thecopied-tokey’s

commandremainsunchanged.Ifyoupunch-throughtoacommandandthendeleteorover-write

theoriginalkey,thepunched-throughfunctionsalsochangeaccordingly.

OPERATION

USING THE HTR 3 REMOTE CONTROL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info