Bedienungsanleitung NAD T 785 (Seite 18 von 52) (Englisch)

602918

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SETUP MENU

The Setup Menu allows one to customize the operation of the T 785 to the ancillary

equipment used in one’s specic AV system. Unless your system exactly matches

the factory defaults as shown in the accompanying Quick Start Guide, you will need

to use the setup menu to congure the inputs of the T 785.

At Setup Menu, the following are congurable – Video Setup, Source Setup,

Speaker Setup, Zone Setup, Amplier Setup, Trigger Setup, Listening Mode

Setup, Display Setup and A/V Presets.

To access and navigate through Setup Menu and its sub-menu selections,

please refer to and follow the directions stated in the sections ‘Display the

OSD’ and ‘Navigating the OSD and Making Changes.’

VIDEO SETUP

This menu allows you to set the display resolution of the T 785 along with

corresponding frame rate and aspect ratio.

Resolution: The T 785 has the excellent ability to upconvert standard

denition video contents to high denition video signal. Depending upon

your TV/Monitor’s resolution capabilities, select the applicable resolution

settings - Auto, 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.When “Auto”

is selected, the T 785 automatically selects the connected TV/Monitor’s

highest compatible resolution.

Note that if the display is connected to Composite or S-Video Monitor OUT,

the video output resolution must be set to 480i or 576i to view content.

Frame Rate: The frame rate is the number of times per second that a

screen image is refreshed. Depending upon your area and video resolution

capability of your TV/Monitor, the following “Frame Rate” options are

available (Note that frame rate is output resolution dependent; not all frame

rate settings are selectable for the various resolution levels).

50Hz: Setting normally for Europe and most of Asia. For resolution

settings 576i and 576p, 50Hz is the only available option.

60Hz: Setting normally for North America. For resolution settings 480i

and 480p, 60Hz is the only available option.

24Hz: Select to deliver lm-like motion characteristics. “24Hz” is

selectable only at 1080p resolution setting.

Aspect Ratio: Select a picture size matching the aspect ratio of your

TV/Monitor.

4:3: Select “4:3” when a standard 4:3 TV is connected. “4:3” is not selectable

when the resolution is set to higher that 480i, 480p, 576i or 576p.

16:9: Select “16:9” when a 16:9 wide TV is connected. “16:9” is the only

available option when the resolution is set to 720p, 1080i or 1080p.

After making changes in “Resolution”, “Frame Rate” or “Aspect Ratio”, scroll

down to “Apply Changes” and press [ ] to implement the settings. A new

OSD prompt will appear as below

Press the [ ] to apply the new resolution or [ ] to return to the current

resolution. If [ ] is selected, you will be prompted again to another OSD

prompt as below

Press [ ] to save the new resolution or [ ] to cancel the change in

resolution. If you do not press either [ ] or [ ] and let the timer elapse,

the new resolution will not be implemented and the current resolution

setting remains.

IMPORTANT NOTE

 Ifyouinadvertentlyselectedaresolutionsetting(like1080p)thatyour

TV/Monitordoesnotsupport,thevideodisplaywillgoblank.Torestore

videodisplay,pressandholdbothfrontpanelbuttonsLISTENINGMODE

andTONEDEFEATandthenreleasebothbuttons-theVFDandOSDwill

bothshow“VideoReset”.Boththe“PictureControls”and“VideoSetup”

settingswillberestoredtotheirfactorydefaultsafterVideoReset.

NOTES

· Whenusingcomponentvideooutput,astandarddenitionvideocan

beupscaledonlyupto1080i.

· Whenthe“Resolution”issetto“Auto”,“FrameRate”and“AspectRatio”

will not be available as options.

OPERATION

USING THE T 785  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 785 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 785

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info