Bedienungsanleitung NAD T 785 (Seite 19 von 52) (Englisch)

602918

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SOURCE SETUP

From Setup Menu, pressing will direct you to the Source Setup menu

wherein you could adjust allocate or change the settings of the following

– Source Setup (Normal View), Source Setup (Table View) and iPod Setup.

SOURCE SETUP (NORMAL VIEW)

The Source Setup (Normal View) menu makes it possible to set, allocate or

change the following settings.

SOURCE

The T 785 is equipped with ten congurable Sources. The settings for each

Source are dependent on the congurations set forth in the parameters for

that particular Source window.

To change or toggle through the Sources, scroll to ‘Source’, press button

and then ENTER or to move up or down the Source selections.

NOTE

 Source5isdefaultedtoiPod.ForSource5tobechangedandallocated

forotherinputs,goto‘iPodSetup’menuunderthe‘SourceSetup’menu.

AtiPodSetupmenu,set‘Enabled’to‘No’–youcannowassignSource5

to other inputs or settings as desired.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

To enable or disable a particular Source, scroll to ‘Enabled’ and press

keys to select ‘Yes’ or ‘No’.

NAME

A new Name maybe assigned to a Source label. For example, if your DVD player

is attached to ‘Source 1’, it is possible to rename ‘Source 1’ to ‘DVD Player.’

In order to rename the Source label, scroll to ‘Name’ and press to go the

character. Then, press to pick through the alphanumeric selections.

Press to move to the next character and at the same time save the

changes done on the current character. The name can be as long as twelve

characters.

The new Name will be shown in the VFD as well as on the OSD.

ANALOG AUDIO

The T 785 has nine analog audio inputs including 7.1 input. These analog

inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, Audio Front,

Audio MP and 7.1 Input can be variably assigned to each Source.

Scroll to ‘Analog Audio’ and then press and then to select and assign

an analog audio input to the particular Source. There are three choices

– Audio, 7.1 Input or O.

When ‘Audio’ is chosen, press and then keys to select and assign the

desired audio input – 1 to 6, Front and MP.

Select ‘7.1 Input’ to choose the audio signal fed to ‘7.1 Channel Input.’ If ‘O’

is selected, no incoming analog audio signal is selected by the particular

Source.

NOTE

 Anincomingdigitalsignalpresentattheassigneddigitalinputwill

alwaystakeprecedenceovertheassignedanalogaudioinput,evenif

botharepresent.Tomaintaintheanalogaudioinputfortheparticular

Source,select‘O’atthe‘DigitalAudio’settingofthesame‘Source’

menu.

OPERATION

USING THE T 785  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 785 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 785

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info