493493
9
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
AUDIO 3-4 OUT
Connect AUDIO 3 OUT (and/or AUDIO 4 OUT) to corresponding
recording components or audio input ports of compatible sources
like cassette deck, CD/DVD recorder or outboard audio processors.
The signal present at AUDIO 3-4 OUT is determined by the current
source selected. There will be no output at AUDIO 3 OUT when
AUDIO 3 is selected. Likewise, there will be no output at AUDIO
4 OUT when AUDIO 4 is the active source input. This prevents
feedback through the recording component thereby preventing
possible damage to your speakers.
When congured, AUDIO 3 OUT and AUDIO 4 OUT are the same
assigned ports for Zone 3 and Zone 4 respectively. See also Zone
output description below.
4 7.1 CHANNEL INPUT
Connect to the corresponding analog audio output of a
multichannel source component such as a DVD-Audio or
multichannel-SACD player or external multichannel decoder (disc
copy protected formats only allow analog signal transfer). Typically,
these sources will produce 5.1-channel output, in which case the
Surround Back jacks are left unconnected. The signal present at
these jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUT
is defaulted to this Source).
There is no bass-management or other processing (other than
master-volume control) available to this 7.1 channel input.
While the multichannel audio output of a DVD/BD player can be
connected to these jacks, using the T 787’s own Dolby Digital and
DTS decoding and digital-analog converters via a digital connection
will usually produce superior results.
5 XM MODULE INPUT (120V version model only)
With XM radio, there are more than 100 channels of music, news, sports,
comedy, talk and entertainment. You will nd that the coverage is
continent wide. The music quality is digital with many commercial-free
music channels.
Connect XM radio cable to this socket. Follow the instructions that
came with your XM radio.
Refer also to the “LISTENING TO XM RADIO” segment of the
“OPERATION” section.
NOTE
The external XM radio is not supplied with your T 787.
DAB MODULE INPUT (230V version model only)
The T 787 is compatible only with the NAD DAB Adaptor module
models DB 1 or DB 2. With DAB, you can receive CD-like quality
programs without any annoying interference and signal distortion.
Plug-in the other end of the Mini-Din connector from the NAD DAB
Adaptor module output port into this socket.
Refer also to the item about “LISTENING TO DAB RADIO” segment of
the “OPERATION” section.
NOTE
The external NAD DAB Adaptor module is not supplied with your T 787.
6 SOFT CLIPPING
Enables NAD’s proprietary Soft Clipping circuitry on all channels.
At ON position, Soft Clipping gently limits the output of the T 787 to
minimize audible distortion should the T 787 be over-driven.
Soft Clipping may simply be left ON at all times to reduce the
likelihood of audible distortion from excessive volume settings.
However, for critical listening and to preserve optimum dynamics,
you may wish to defeat it by setting this switch to OFF.
7 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the T 787
via compatible external controllers.
Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
8 +12V TRIGGER OUT
The T 787 has three +12V TRIGGER OUT ports (OUT 1, OUT2 and OUT3)
that can be congured to supply +12V DC to a linked component or
system. See discussion on Trigger Setup at the “Setup Menu” literature
for guidelines on how to congure +12V TRIGGER IN/OUT.
Use a 3.5mm mini-jack connector to pass +12 volts at a maximum
current of 50 milliamps to an auxiliary equipment such as a
multichannel amplier or subwoofer. The center conductor (hot) of
the 3.5mm jack is the control signal. The outside conductor (shield)
is the ground return-path.
This output will be 12V when the T 787 is ON and 0V when the unit
is either OFF or in standby mode.
+12V TRIGGER IN
With this input triggered by a 12V DC supply, the T 787 can be switched
ON remotely from standby mode by compatible devices such as
ampliers, preampliers, receivers, etc. If the 12V DC supply is cut o,
the T 787 will return to standby mode.
Connect this +12V Trigger input to the remote devices
corresponding +12V DC output jack using a mono cable with
3.5mm male plug. The controlling device must be equipped with a
+12V trigger output to use this feature.
9 IR IN/IR OUT 1-3
These mini-jacks accept and output remote-controlled codes in
electrical format, using industry-standard protocols, for use with “IR-
repeater” and multi-room systems and related technologies.
All NAD products with IR IN/IR OUT features are fully compatible
with the T 787. For non-NAD models, please check with your other
product’s service specialists as to their compatibility to the T 787’s IR
features.
IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another compatible device
to allow control of the T 787 from a remote location.
IR OUT 1, IR OUT 2
Connect IR OUT 1 (and/or IR OUT 2) to the IR IN jack of a compatible
device.
Command and control the linked compatible device by directing its
own remote control to T 787’s infrared receiver.
IR IN and IR OUT 1, IR OUT 2, IR OUT 3
Connect the T 787’s IR IN to the IR OUT of a compatible device.
Connect also the T 787’s IR OUT 1 (and/or IR OUT 2, IR OUT 3) to the
IR IN of a compatible device.
With this setup, the T 787 acts as an “IR-repeater allowing the device
connected to the T 787’ s IR IN control or command of the other
device linked to T 787’s IR OUT 1 (and/or IR OUT 2, IR OUT 3).
IR OUT 3
IR OUT 3 can only function as an “IR-repeater” as described above.
IDENTIFICATION OF CONTROLS
REAR PANEL
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD T 787 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD T 787

NAD T 787 Bedienungsanleitung - Deutsch - 48 seiten

NAD T 787 Bedienungsanleitung - Holländisch - 48 seiten

NAD T 787 Bedienungsanleitung - Französisch - 48 seiten

NAD T 787 Bedienungsanleitung - Italienisch - 48 seiten

NAD T 787 Bedienungsanleitung - Spanisch - 48 seiten

NAD T 787 Bedienungsanleitung - Schwedisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info