Bedienungsanleitung NAD T 787 (Seite 10 von 48) (Englisch)

493493

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

10 HDMI (HDMI IN 1-6, HDMI OUT 1-2)

• Connect the sets of HDMI input to the HDMI OUT connectors of

source components such as DVD player, BD player or HDTV satellite/

cable box.

• Connect the HDMI OUT 1 and/or HMDI OUT 2 to compatible HDTV

or projector with HDMI input. Both HDMI output ports display

simultaneously the same audio/video source.

WARNING

Before connecting and disconnecting any HDMI cables, both the T 787

and the ancillary source must be powered OFF and unplugged from the

AC outlet. Failure to observe this practice may cause permanent damage

to all equipment connected via HDMI sockets.

11 MP DOCK

The T 787 is equipped with a data port in the rear panel where an

optional NAD IPD (NAD IPD Dock for iPod) 1, NAD IPD 2 and later

variants can be plugged in.

• Connect the “MP DOCK (DATA PORT)” jack of the T 787 to the

corresponding “DATA PORT” socket of the optional NAD IPD model.

• AUDIO 5 and S-VIDEO 3 are the assigned default ports for the audio/

video output of the separately sold NAD IPD (NAD IPD Dock for

iPod) 1, NAD IPD 2 and later variants.

• Refer also to the “LISTENING TO YOUR iPod PLAYER” segment of the

“OPERATION” section.

NOTE

The NAD IPD Dock for iPod is not supplied with your T 787.

12 ETHERNET/LOCAL AREA NETWORK (LAN) PORT

LAN connection must be setup for wired connection to be established.

Set up a Wired Ethernet broadband router with broadband internet

connection. Your router or home network should have a built-in DHCP

server to consummate the connection.

• Using a standard straight-through Ethernet cable, connect one

end of the Ethernet cable to the LAN port of your wired Ethernet

broadband router and the other end to T 787’s LAN port.

• This Ethernet connection has similar function as that of the RS232

connection. With your PC and the T 787 on the same network,

it allows remote control of the T 787 via compatible external

controllers.

• Refer to the NAD website for information about RS232 Protocol

documents and PC interface program.

NOTES

• NAD is not responsible for any malfunction of the T 787 and/or the

internet connection due to communication errors or malfunctions

associated with your broadband internet connection or other connected

equipment. Contact your Internet Service Provider (ISP) for assistance or

the service bureau of your other equipment.

• Contact your ISP for policies, charges, content restrictions, service

limitations, bandwidth, repair and other related issues pertinent to

internet connectivity.

13 COMPONENT VIDEO INPUT 1-3, COMPONENT VIDEO OUT

• Connect the Component Video Input to Component Video output

of compatible source components, typically a DVD player, BD

player, digital cable box or other applicable components. Connect

Component Video Out to the Component Video input of a

compatible video monitor/TV.

• Be sure to observe consistency in connecting the Y/Pb/Pr jacks

to the corresponding sources/inputs. The routing of the three

component video input is fully congurable via the Source Setup

item of the Setup Menu OSD.

• The T 787’s sets of component video input and output are fully

wideband and compatible with allowable HDTV formats.

14 ZONE 2-3-4

• The T 787 has three congurable Zones – Zone 2, Zone 3 and Zone

4. The Zone feature allows one to simultaneously experience in

a dierent zone or location of the house a Source assigned to a

particular zone.

• Sends zone selected audio source to the corresponding audio input

of another zone. Use high quality patch cables to reduce noise

pickup over long distance runs.

• For a better understanding of zone settings, study below the section

about “Zone Controls” of the “Main Menu” discussion as well as the

item about “Zone Setup” under the “Setup Menu” literatures.

15 AUDIO PRE-OUT

The AUDIO PRE- OUT makes it possible to use the T 787 as a preamplier

to external power ampliers for some or all channels.

• Connect FRONT L, FRONT R, CENTER, SURR R, SURR L, SURR-BL and

SURR-BR to the respective channel input of a power amplier or

ampliers driving the corresponding applicable speakers.

• Connect the SUBW1 (and/or SUBW2) output to powered (“active”)

subwoofers or to power amplier channels driving a passive system.

• Unlike the full range channels, there is no power amplier built-into

the T 787 for a subwoofer.

16 SPEAKERS A, SPEAKERS B

• Connect the respective SPEAKER A’s FRONT L, FRONT R, CENTER,

SURR R, SURR L, SURR-BL and SURR-BR channels to their

corresponding loudspeakers. Make sure the “+” (red) terminal and

“-“(black) terminal are connected to the corresponding “+” and

“-“terminals of the loudspeaker. Use extra care to ensure that no

stray wires or strands cross between posts or terminals at either end.

• Connect left and right channels of SPEAKERS B to the corresponding

remote loudspeakers. When SPEAKERS B is activated, the output

is converted to “Stereo Downmix”. Combining SPEAKER A and

SPEAKER B (SPEAKERS A + B) will also result to the source being

downmixed to stereo.

• The T 787 is designed to produce optimum sound quality when

connected to speakers with impedances within its operating range.

Please make sure that all the speakers are rated 4 minimum per speaker.

NOTE

Use stranded wire of at least 16 gauge (AWG). Connections to the T 787

can be made with banana plugs (120V version only) or by using bare

wire or pins. Use the transverse hole through the post for bare-wire or

pin connections. By loosening the terminal’s plastic nut, make a clean,

neat connection and re-tighten carefully. To minimize the danger

of short-circuit, ensure that only 1/2-inch of exposed wire or pin is

employed when connecting.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD T 787 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info