Bedienungsanleitung NAD T 787 (Seite 35 von 48) (Englisch)

493493

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Until now, analogue radio signals such as FM or AM have been subject to

numerous kinds of interference on their way from the transmitter to your

radio. These problems were caused by mountains, high-rise buildings

and weather conditions. With Digital Audio Broadcast (DAB), you can now

receive CD-like quality radio programs without any annoying interference

and signal distortion. DAB broadcasts use digital signals rather than

traditional analogue transmissions, thus providing clear high quality

reception. You get far more robust reception and virtually hiss or crackle

free sound with DAB as long as you are within a good coverage area.

With DAB, the listener can scroll through a list of available stations - then

instantly tune to the station of his choice. There is no need to remember

channel frequencies. All broadcasts are selected by simply selecting the

service name.

The T 787 makes it possible for you to enjoy listening to DAB broadcasts.

The T 787 has a Digital Audio Broadcast (DAB) module socket on the rear

panel for adding a separately sold and NAD-specied outboard DAB

module - the NAD DAB Adaptor DB 1 or the DAB+ NAD DAB Adaptor

DB 2. All the control software for this format is included; just plug-in the

module and start enjoying the CD-like quality sound and expansive content

selection available with DAB.

IMPORTANT NOTES

• The T 787 is compatible only with the NAD DAB Adaptor module models

DB 1 or DB 2.

• When using the HTR 8 remote control to carry out DAB commands,

ensure that the DEVICE SELECTOR is set to “TUNER”.

• In the DAB discussions below, all control buttons mentioned are with

reference to the HTR 8 remote control.

CONNECTING THE DAB MODULE

Plug-in the other end of the DIN connector (supplied with your NAD DAB

Adaptor DB) from the DAB module’s output port into the corresponding

DAB module input socket on the rear panel of the T 787. Select DAB mode

on the T 787 by toggling HTR 8’s [AM/FM/DB] button.

NOTES

• The NAD DAB Adaptor (DB 1 or DB 2) is not supplied with your T 787.

• Refer to the installation diagram printed on the carton box of the NAD

DAB Adaptor for guidance on how to connect the NAD DAB Adaptor to

the T 787.

• If there is no NAD DAB Adaptor connected, the VFD will show “Check

DAB Tuner”.

DAB OPERATION

With the separately sold NAD DAB Adaptor already connected to the T 787,

you can now carry out the T 787 to receive DAB broadcasts.

1 Toggle [AM/FM/DB] button until DAB mode. The VFD will show “No

Service List” indicating that there are no scanned DAB broadcast

services yet. This is the default mode of the NAD DAB Adaptor.

DAB P--

No Service List

2 To tune to DAB broadcast services, press [TUNER MODE] and then

toggle [ A/S ] to select either “Full Scan” or “Local Scan”.

FULL SCAN will enable the scanning of the full range of digital

frequencies (Band III and L-Band).

LOCAL SCAN performs local scanning of available DAB services in your

area. Check with your dealer or visit www.WorldDAB.org to check the

applicable digital transmission frequencies in your area.

3 Upon selecting either “Full Scan” or “Local Scan”, automatic scanning

will be performed. This sequence cannot be interrupted. During the

sequence, the following message will be visible in the VFD.

The bars show the progress of the sequence. When scanning is

completed, the last number shown on the right side of the VFD

corresponds to the total number of DAB broadcast stations found. Then,

the rst station is tuned in (See “ALPHANUMERIC” section below to

understand the order or arrangement of stations).

Scanning... 19

||||||||||||

OPERATION

LISTENING TO DAB RADIO

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 787 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info