Bedienungsanleitung NAD T 787 (Seite 36 von 48) (Englisch)

493493

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

4 Press and hold [ENTER] button to check the strength of the incoming

signal. The more segments visible in the lower display line, the stronger

the signal. By changing the position of the antenna, you can increase

the signal strength. You can also opt for an external antenna. Consult an

antenna professional for more information.

Signal Strength

||||||||||||

NOTE

“No Service List” will also be shown in the VFD when no stations are

found after the scanning process. If this occurs, check the connection

and position of the DAB antenna or call your local DAB broadcast

providers for coverage information.

SERVICE LIST

Follow the steps below to select through the DAB service stations found.

1 At DAB mode, press [ A/S ] to step through the list of available stations

as shown in the lower display line of the VFD.

DAB P--

$CBC R2 %

2 Press [ENTER] to select the desired station.

DAB TUNER MODE

Aside from “Full Scan” and “Local Scan” as already described above, pressing

the [TUNER MODE] button will also present you with other options namely

- Station Order, DRC, Manual Scan, Prune List and Reset.

STATION ORDER

Use “Station Order” to sort the sequence of the listed stations. There are

three orders - Alphanumeric, Ensemble and Active.

1 While listening to a DAB broadcast, press [TUNER MODE] button and

[ A/S ] to select “Station Order”. Press [ENTER].

2 Toggle [ A/S ] to select through “Alphanumeric”, “Ensemble” and “Active”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio broadcasts are

arranged in the order of their ensemble names.

NOTE

Ensemble is also interchangeably termed as “multiplex” by other

broadcast providers.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

DRC

The level of compression of stations can be set to eliminate the dierences

in dynamic range or sound level between radio stations. Popular music

would normally be more compressed than classical music, resulting in

possible dierent audio levels when changing from one station to the

other. Setting the DRC to “0” means no compression, “1/2” indicates medium

compression and “1” shows maximum compression. No compression is

recommended, especially for classical music.

1 While listening to a DAB broadcast, press [TUNER MODE] button and

[ A/S ] to select “DRC”. Press [ENTER].

2 Toggle [ A/S ] to select through “DRC 0”, “DRC 1/2” and “DRC 1”.

3 Press [ENTER] to select desired DRC level.

MANUAL SCAN

This option allows you to directly tune to a desired channel and include it

in the service list (if not yet available at the time). You can also use manual

scan to assist you in positioning the DAB antenna for best reception of the

desired channel.

1 While listening to a DAB broadcast, press [TUNER MODE] button and

[ A/S ] to select “Manual Scan”. Press [ENTER]. The current channel and

frequency are shown in the upper line of the VFD. The “bars” at the

lower line of the VFD indicate the signal strength level of the current

channel.

$LH 1464.944M%

|||||||||||

2 To select other channels, toggle [ A/S ] to step through the channel list.

Release [ A/S ] when you have arrived at your desired channel. Channel

and frequency are shown in the upper line of the VFD. The “bars” at the

lower line of the VFD indicate the signal strength level of the current

channel. To improve the reception of the selected channel, adjust or

reposition the DAB antenna until the best reception is indicated.

3 Press [ENTER] to tune the selected channel.

NOTE

The number of ensembles and stations that could be scanned will vary

depending upon your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and [ A/S ] to select “Prune List”.

2 Press [ENTER]. Any inactive stations are automatically deleted.

OPERATION

LISTENING TO DAB RADIO

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 787 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info